Clamping Tools and Lifting Clamps
Vertical Lifting Clamp (Lock Handle Type With Universal Shackel) แคลมป์ยกเหล็กแนวตั้ง
SVC 0.3E ~ 2E
UNIVERSAL TYPE SHACKLE
Lightweight clamp primarily designed for the vertical lifting of steel plates. The unique design of this clamp also makes it possible for lifting work piece to any directions.
• The spring-loaded tightening lock mechanism assures a positives initial clamping force. • The universal shackle allows the cam to generate a clamping force on the work piece no matter which direction it is pulled. • The clamping force increases in proportion to the weight of the load. • The main body and the shackle are made of die-forged special alloy steels, which are optimally tempered for maximum strength and durability. • High-frequency quenching of die-forged special alloy steels gives greater durability to the cam. • The main body is a baked-on finish.
■ Example of use
Always lift work pieces at 2 or more points for safety. The Universal shackle allows the cam to generate a clamping force on the work piece no matter which direction it is pulled.
■ Dimensions Table
(Unit : mm)
Order No.
L H h1h2h3 B b1b2D1D2T1T2T3 t SVC0.3E 157~176 110 57 48 30 100 25 19 26 26 49 36 39 8 SVC0.5E 180~204 125 67 53 34 110 28 22 30 30 55 40 45 10 SVC1E 223~257 160 80 60 38 130 35 29 35 35 65 48 53 12 SVC1.5E 254~290 174 88 67 42 150 39 33 45 45 74 55 67 14 SVC2E 292~335 194 97 73 45 162 43 37 55 55 76 58 83 16
■ Specification Order No.
Rated capacity (ton)
Jaw opening
0.3 0.5 1.5 1 2
0~16 0~19 0~25 0~28 0~32
SVC 0.3E SVC 0.5E SVC 1E SVC 1.5E SVC 2E
Vertical Lifting Clamp (Handle Type) แคลมป์ยกเหล็กแนวตั้ง
• The spring-loaded tightening lock mechanism ssure a positive initial clamping force. • The clamping force increase in proportion to the weight of the load. • The main body and the shackle are made of die-forced special alloy steels, which are optimally tempered for maximum strength and durability. • High-frequency quenching of die-forced special alloy steels gives greater durability to the cam. • The main body is a baked-on finish.
SVC 0.5H~10WH TIGHTENING LOCK MECHANISM
Standard design clamp for vertical lifting of steel plates and steel structures.
■ Example of use
Lock handle (Tightening)
• Vertical lifting of steel structure
• Vertical lifting of steel plate
• When structure have not enough width for two-point lifting
• The clamp can be unlocked by pulling the lock handle completely downward. when unlocked there will be no clamping force on the work piece. Never attemp to lift when the clamp is unlocked, the clamping force on the work piece will be insufficient. • The clamp will lock onto the work piece when the lock handle is pulled completely upwards. When locked the shock from the work piece coming to rest on the floor or the slackening of the sling ripe will not cause the clamp to come lose from the work piece.
• When lifting a pipe, position the clamps so that they face each other as shown in the drawing. (The lifting angle of the sling rope must be kept 60 degrees) • This clamp cannot be used on pipes with diameters less than 300 mm.
• Vertical lifting of pipe
• Tuming-over
of steel plates
Lock handle (releasing)
Always lift work pieces at 2 or more points for safety.
■ Specification and Dimensions Table Order No. Rated capacity (ton) Jaw opening (mm)
L (MAX)
H h1 h2 h3 B b1b2D1D2T1 T2 t 250 158 80 60 36 131 36 26 36 64 67 49 12 310 185 90 69 45 152 42 32 48 85 81 59 16 360 225 104 70 45 165 43 44 48 85 68 53 16 375 210 100 77 47 172 48 39 60 106 97 71 18 405 225 105 81 47 182 51 42 66 117 102 75 20 432 253 123 99 65 212 56 67 66 117 102 75 20 455 260 120 95 49 220 65 650 84 148 122 92 22 485 285 141 116 70 245 65.5 74.5 84 148 122 92 22 615 402 195 145 80 340 105 75 60 120 149 95 25 615 402 195 145 80 360 105 95 60 120 149 95 25 645 412 205 145 80 360 105 85 65 130 177 116 32 645 412 205 145 80 380 105 105 65 130 177 116 32
0.5
0-19 0-25 0-40 0-30 0-35 25-60 0-40 25-65 10-70 30-90 20-80 40-100
SVC0.5H SVC1H SVC1WH SVC2H SVC3H SVC3WH SVC5H SVC5WH SVC7H SVC7WH SVC10H SVC10WH
1 1 2 3 3 5 5 7 7
10 10
JSR Entech Catalogue 1139 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook