Clamping Tools and Lifting Clamps
• The spring-loaded tightening lock mechanism assures a positive initial clamping force. • With the use of a remote control lever and rope, which are supplied with the clamp, the clamp can be unlocked from the the floor to detach from the work piece. • The clamping force increases in proportion to the weight of the load. • The main body and the shackle are made of die-forged special alloy steels, which are optimally tempered for maximum strength and durability. • High-frequency quenching of die-forged special alloy steels gives greater durability to the cam. • The main body is a baked-on finish. Vertical lifting clamp for the lifting of steel plates and steel structures. Vertical Lifting Clamp (Lock lever type) แคลมป์ยกเหล็กแนวตั้ง SVC 0.5L ~ 5L
■ Example of use
Always lift work pieces at 2 or more points for safety
(Releasing) • The clamp will unlock and the cam will retreat into the body when the lock handle is pulled completely downwards as shown in the drawing. • When the clamp is high out of reach, the clamp can be unlocked via the remote control unlocking lever and rope.
(Tightening) • The clamp will lock onto the work piece when the lock lever is pulled completely upwards as shown in the drawing. • When locked, the shock from the work piece coming to rest on the floor or the slakening of the sling rope will not cause the clamp to come lose from the work piece.
TIGHTENING LOCK MECHANISM
Equipped with Remote control and releasing mechanisms
■ Specification and Dimensions Table
(Unit : mm)
Rated capacity (ton)
Jaw opening L (MAX)
Order No.
H h1 h2 h3 B b1b2D1D2
T1
T2 T3 t 67 49 12 81 59 16 97 71 18
0.5
0~19 0~25 0~30 0~35 0~40
SVC 0.5L SVC 1L SVC 2L SVC 3L SVC 5L
250 158 80 60 36 131 36 26 36 64 89 (80) 310 185 90 69 45 151 42 32 48 85 113 (104) 375 210 100 77 47 172 48 39 60 106 130 (118)
1 2 3 5
405 225 105 91 47 182 51 42 66 117 141 (129) 102 75 20 455 260 120 95 49 220 50 50 84 148 157 (145) 122 92 22
Drum Lift Clamp (Vertical lifting) แคลมป์ยกถังนํ้ามันแนวตั้ง
Drum Lift Clamp แคลมป์ยกถังนํ้ามัน
DLC 0.5
Clamp for lifting, handling and pulling up of drum cans. • By clamping the rim, steel and fibre drum cans and drum cans without lids can be lifted. • Drum cans can be lifted vertically and horizontally, and turned over with this clamp.
DLC 0.5V
Clamp dedicated for vertical lifting of the drum can Firm locking by easy operation (by wedging method) • The unit enables safe vertical lifting of the drum can. • Locking can be easily made by pushing and drawing the grip. • Firm locking is realized by wedging method. • The lifting ring is so large in diameter as to be directly hooked. • The major components are made of high-tensile steel plate, so they are extremely rigid and durable. • The main body is of baking finish, and so it is extremely free of rust. • Applicable drum cans JIS Z1611 type. H class and M class (with 600Ø lid), and the drum can with a lid of 500 to 700 in diameter and with a chime hoop of 2 to 3.5 mm in thickness (Vertical lifting is enables only when the lid is 600Ø.)
• The main body and the shackle are made of die-forged special alloy steels, which are optimally tempered for maximum strength and durability. • High-frequency quenching of die- forged special alloy steels gives greater durability to the cam.
■ Example of use
You cannot lift the drum can with no fringers. You are not to use this unit to raise the drum can.
Do not lift five or more drum cans at once for safety.
■ Specification
■ Specification
(Unit : mm)
(Unit : mm)
Order No.
Rated capacity (ton)
Jaw opening
Order No. DLC 0.5V
Rated capacity (ton)
Clamping range (mm)
0.5
0~18
0.5
2~3.5
DLC 0.5
JSR Entech Catalogue 1141 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook