Clamping Tools and Lifting Clamps
Screw Cam Clamp (Double Eye Type) Pat. แคลมป์ยกเหล็กด้านข้าง
Screw Cam Clamp (Single Eye Type) Pat. แคลมป์ยกเหล็กด้านข้าง
This screw clamp can be used for a variety of operations such as lifting up and down. lateral (horizontal) pulling and turning over.
Ideal clamp for suspension of a chain block or hoist from a steel beam.
• The round cam has a mechansm that it returns to its original position with the force of equipped spring. • The screw is placed on top (operator's side) when used in horizontat pulling. so the tightening operation can be done easily. (Even when installing on to the upper beam, the tightening can be done nearer side of an operator) ※ Accessory included : 17x21 Double size Ratchet Wrench (Short Type)
• The round cam has a mechansm that it returns to its original position with the force of equipped spring. • The screw is placed on top (operator's side) when used in horizontat pulling. so the tightening operation can be done easily. (Even when installing on to the upper beam. the tightening can be done nearer side of an operator) ※ Accessory included : 17x21 Double size Ratchet Wrench (Short Type)
Order No. SWC0.5N
Capacity (ton)
Clamp range (mm)
Order No. SSC0.5N SSC1N SSC2N
Capacity (ton)
Clamp range (mm)
0.5
0~5
0.5
0~5 0~40 0~40
1 2
0~40 0~40
SWC1N SWC2N
1 2
Screw tightening torque must be more than 25N · m (Abt. 250kgf · cm)
Screw tightening torque must be more than 25N · m (Abt. 250kgf · cm)
Screw Cam Clamp (Double Eye Type) Pat. แคลมป์ยกเหล็ก มีรูคล้องสลิง 2 ข้าง
"Twist Cam Type" for visual confilmation for tightening
This screw clamp can be used for a variety of operations such as lifting up and down. lateral (horizontal) pulling and turning over. Adequacy of tightening can be visually confirmed by secure and safety structure.
Tightening
Line mark has phosphorescent (glow-in-the dark) paint
Matching of two lines
• The screw is placed on top (operator's side) when used in horizontat pulling. so the tightening operation can be done easily. (Even when installing on to the upper beam, the tightening can be done nearer side of an operator) • The clamp is equipped with a screw and a round cam (special spring-loaded) which provide sure clampin force on a workplece even when vibrations occur during operation. • Cam holder and collar respectively has phosphorescent (glow-in-the dark) paint for easy recogniton of adequate tightening ※ Accessory included : 17x21 Double size Ratchet Wrench (Short Type)
Order No. SWC0.5S SWC1S
Capacity (ton)
Clamp range (mm)
0.5
0~5 0~40 0~40
1 2
JSR Entech Catalogue 1146 SWC2S
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook