Clamping Tools and Lifting Clamps
Super Lock Hook Pat. ตะขอยกเหล็ก
Super Lock Hook (with Swivel) ตะขอยกเหล็ก ห่วงหมุนรอบตัว
SLH1N~3N
SLH2S~3S
Optimal for lifting of road plate and using as a safety hook
Optimal for lifting road plate and for safety hooking. • Optimal for laying and removing road plate, and for lifting wire ropes and sling belts. • The Hook is attached with a swivel eye and so has a good torsibility of wire rope, there by preventing the turning of road plate. • The mouth is wide enought for easy hooking and disengagement. • When lifting the work, closing lock is automatically engaged to ensure safety. • The main body and the shackle are made of special alloy steel molded and forged, whose optimal heat treatment ensures rigidity and superb durability. • The main body is of barking finish. ■ Example of use • Laying andremoving of road plate
• For direct slinging as a safety Hook
• Optimal for laying and removing road plate, and for lifting wires ropes and sling belts. • The wide mouth of the hook is very effective when attaching and detaching the hook from the road plate. • When lifted, the lock will automaically close and prevent the hook from coming loose. • The main body and the shackle are made of die-forged special alloy steels, which are optimally tempered for maximum strength and durability. • The main body is a baked-on finish.
• As a safety hook for vertical lifting
• Prevent fingers from being caught in the mouth
• When lifted, the lock will automatically close and prevent the hook from coming loose.
The diameter of the hole and the thickness of road plate to be applied to shall be within the ranges stated in the drawing on the right.
■ Dimensions Table
(Unit : mm)
Rated capacity (ton)
Order No. SLH 2S SLH 3S
H1 H2H3H4H5H6 L1 L2T1T2T3 B D R
• Easy attaching and detaching through the wide mouth of the hook
2 3
402 405
30 166 75 33 169 78
29 31
147 70 117 50
46 54
47 19 38
Lifting Hook ตะขอยก
HHC 0.5~5
Hook for lifting and handling of steel plates and various stee
The thickness of the road plate and the dimensions of the hole must be within the specifications shown in the drawing on the left.
• Attaching to a hooking hole
Standard type
Grip type HHC-G
• The roller at the head of the hook will not damage the sling rope. • The sharp hook point is effective when inserting into a small clearance. • The landing point is at the back of the hook. This unique design makes it extremely simple to remove the hook from the work piece. • The body is made of die-forged special alloy steels, which is optimally tempered for maximum strength and durabillty. • The main body is a baked-on finish. • The HHC-G type is equipped with a handle for easy operation.
• Laying and removing of steel decks
■ Specification and Dimensions Table
(Unit : mm)
S.P. (Distance between safety points)
Rated capacity (ton.)
Max. plate thickness
Order No.
L A B b S W
■ Dimensions Table
(Unit : mm)
0.5
58 152 121 27 45 30 63 65 178 144 33 51 40 80 80 223 182 42 62 54 105 95 264 215 49 73 65 125 125 342 279 60 96 85 160
111 126 154 187 243
HHC 0.5 HHC 1 HHC 2 HHC 3 HHC 5
Rated capacity (ton)
Order No.
C B bDd H h1 h2R T t1t2t3 80 140 65 56 24 298 210 80 32 48 28 16 28 96 166 75 64 32 339 236 89 38 54 29 18 30 96 169 78 64 32 339 236 89 38 54 31 18 33
1 2 3 5
1 2
SLH 1N SLH 2N
JSR Entech Catalogue 1150 SLH 3N 3
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook