Puller
Sliding Hammer Bearing Puller Set (Professional Use Heavy Duty Type) เหล็กดูดลูกปืนแบบกระแทก
• Tool set exclusively for removing bearings from internal rings. • Sliding the body of the hammer, the strong impact to the grip enables bearing extraction.
■ Example of use
BH 32
Do not pinch hands or fingers in the grip area.
(mm)
Order No.
Item Name
Item No.
Quantity
Slide hammer Internal claw
BPH 6
1 Set
BPJ 0~4
5 1
BH 32
Steel case
Bearing Puller Set ชุดเหล็กดูดลูกปืน แบบดูดในรู
1. Insert the internal claw to meet the internal diameter of the bearing at the depth of the bearing and tighten the adjustable screw, set the internal claw to be hooked firmly to the depth of the bearing. (Fig 1) 2. Fix and connect the lower part of the forcing screw of the standing puller to the adjustable screw. (Fig 2) 3. Fix and tighten the hexagonal part at lower portion of the forcing screw with a spanner and remove thebearing by tightening the nut. (Fig 2)
BP 15S~30FS
BP 30S
BP 30FS
BP 15S
Example of use
(mm)
Applicable Bearing To Remove
Order No.
S T A B H Reachof Claw
8, 10, 12, 15 42~88 100 10 20 120 Max.150 17, 20, 25,30 47~98 110 10 25 130 Max.150
BP15 S BP30 S
BP30 FS 8, 10, 12, 15,17, 20, 25, 30
Full Set
Max.150
Bearing Puller Set (Professional Use Heavy Duty Type) เหล็กดูดลูกปืนชุด
Example of use
(mm)
Order No.
Item Name
Item No.
Quantity
Slide hammer Internal claw Standing puller Opening stopper
BPH 6
1 Set
BPJ 0~7
8
BPS 6 BPU 6 BPM 6 BPX 4
1 pcs. 1 pcs. 1 pcs. 1 pcs.
BP 60
Slanted single offset wrench Hexagonal key wrench
JSR Entech Catalogue 1160 Steel case
1
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook