Piping Tools
Magnetic pick-up tool with LED light Hose cutting plier คีมตัดท่อยาง
Tube Reamer เครื่องมือลบคมท่อ
TR322
TR1254S
TR835S
• For cutting and separating of PVC- and rubber-tubes • Cutting capacity from Ø 6-35 mm • Handle with PVC insulation for optimum handling • Double life cycle, because of double blade function, remove the bracket and rotate the blade by 90 degrees
■ TR322 : For copper pipes (Internal surface chamfering)(Suitable for copper, aluminum, brass and pvc pipes) • 11 pieces of blades enables the work very smooth. ■ TR-S : For stainless steel pipes (both Internal and external surface chamfering) (Suitable for stainless steel, copper, aluminum, brass and pvc pipes) • The cutting ability by 40 pieces of blade. - Clean Surface! (mm) Order No. Chamfering capacity for external and internal diameters Full lenght diameter TR322 3~22 (external) 60.5 43 TR835S 8~35 (external) 60 48.5 TR1254S 12~54 (external) 84 67
Order No.
mm 255
50816473500 *50816470000
Spare Blade
Flexible and PE Pipe Cutter คีมตัดท่ออ่อนพีวีซี
Example of use
Deburring System Specialty Blades
PC38
• Superb cut for soft resin piping such as polyester resin flexible tube • Attaching the blade in the opposite direction, you can use again which is economical. • The body is made of aluminium very light weight.
PLASTIC REAMER SP81005 Deburr both inside and outside edges of tube. Made of plastic body. Have 3 cutters. Reamer for aluminum, brass and copper tubing. Range : 4-42mm.
(mm)
Order No.
Outer diameter
Full lenght
Spare blade
Under 38
218
PCS38
PC38
Flaring Tool Set, Eccentric Cone Type Pat. ชุดบานท่อทองแดง
Spare Edges อะไหล่ใบมีดตัดท่อพีวีซี
TF 455WN • 456WN
■ Eccentric type
Feed handle type (Manual)
VKS34N
VKS42N
Flaring cone The precision finished flaring cone, using eccentric rotation, allows neat and even flaring through low force due to the even flaring of the cone. for New cooling media
VKS63N
VKS50
PCS38
(mm)
Order No. VKS 20 * VKS 30 * VKS 34N VKS 42N VKS 50 VKS 50N * VKS 63N
For Cutter No.
• All eccentric cone type models have an overload prevention mechanism which allow the clutch to run idle after completion of the flaring. • Clutch mechanism for preventing over load (unit : inch) Order No. Applicable diameter of tube Mild copper and Aluminium pipe TF455WN ¼ • ⅜ • ½ • ⅝ • ¾ TF456WN* ¼ • ⁵⁄₁₆ • ⅜ • ½ • ⅝ • ¾
VK 20 VK 30
VK 34N VK 42N VK 50 VK 50N VK 63N PC 38 PE 42
PCS 38
JSR Entech Catalogue 1164 PES 42*
*รุ่นอักษรสีเขียวเป็นสินค้าราคาพิเศษจำ�นวนจำ�กัด
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook