Measuring Tools
Measurement Data Wireless Communication System U-WAVE Measurement Data Management Convenient data collection tool and quality control software
• Data format Example of format when the Digimatic gage displays 12.34
■ U-WAVE-T Transmits measurement data to U-WAVE-R. Select IP67 or buzzer model, according to your application. U-WAVE-R can be connected to Digimatic gages by dedicated cable for U-WAVE-T (option). Model U-WAVE-T (IP67 type) U-WAVE-T (Buzzer type) Order No. 02AZD730G 02AZD880G Protection Rating IP67 None Data reception indication LEDs Buzzer and LEDs Power supply Lithium battery CR2032×1 Battery life Approx. 400,000 transmissions Dimensions (mm) 44×29.6×18.5 mm Mass (g) 23 g * Order No. differs depending on the destination country.
*3 Unique number assigned to U-WAVE at shipment Notes on identification of measurement data and multiple systems operation Following the above format, the U-WAVE data format starts with a 4-digit code where the first two digits represent receiver channels and the last two are transmitter channels. The large number of transmitter/ receiver combinations possible with this scheme ensures that the receivers in a factory measurement system only accept data from the intended transmitters, even when several receivers are all within communication range of different transmitters using the same channel. Different frequency bands (up to 15 available) may also be used to further ensure that there are no communication problems between adjacent U-WAVE-R units.
■ U-WAVE-T dedicated connection cable Transmits measurement data to U-WAVE-R. Select IP67 or buzzer model, according to your application. U-WAVE-R can be connected to Digimatic gages by dedicated cable for U-WAVE-T (option). A dedicated cable connects a Digimatic gage to U-WAVE-T. Check the connector (A to G; refer to pages A-25 and A-26 for details) compatible with the Digimatic gage to be used and select either standard type (figure 1) or foot switch type (figure 2) according to your application. Type Standard connecting cable Connecting cable for foot switch Order No. Order No. (A) Water-proof model with output button 02AZD790A 02AZE140A (B) Water-proof model with output button 02AZD790B 02AZE140B (C) With data-out button 02AZD790C 02AZE140C (D) 10-pin plain type 02AZD790D 02AZE140D (E) 6-pin round type 02AZD790E 02AZE140E (F) Plain type straight 02AZD790F 02AZE140F (G) Plain type straight water-proof model 02AZD790G 02AZE140G
JSR Entech Catalogue 7 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook