Hydraulic Equipment
Standard Botttle Jacks แม่แรงไฮดรอลิค รุ่นมาตรฐาน
• Widely used in construction machinery, civil engineering work and as onboard vehicle jacks. • These are a standard type of jack used throughout the world for vehicles, constr uction and industrial machinery, etc. • They are also widely used in disaster prevention machinery, earthquake reconstruction, and for rental-lease equipment. • These labor-saving devices can lift heavy loads with the smallest of hand operating forces.
MH-100Y
MH-10
MS-2
MH-50Y
h Min. Height (mm)
h1 Lifting Height (mm)
h2 Extension Screw
H Max. Height (mm)
a Socket Dimensions
1 x w Base Dimensions
Handle Dimensions
Operating Force
No. of Operations
Required Oil
Gross mass
Specs.
Capacity KN (ton)
Order No.
(mm)
(mm) Ø 25 Ø 25
(mm)
(mm)
(N) 382
(cc) 40 72 76 127 118 195 320
(kg) 2.2 2.4 2.7 4.0 3.7 5.6 8.1
20 (2) 20 (2) 30 (3) 40 (4) 50 (5) 70 (7)
150 85 180 115 190 115 190 115 200 120 200 120 240 150 265 165 270 160 280 160 305 170
50 50 60 70 70 70 80 80
285 345
65x110 19.1x330
22 33 48 85 73 72
MS-2S MS-2 MS-3 MN-4 MS-5Y MH-7 MH-10 MH-15 MH-20
65x110 Ø 19.1x330 382
365 29x30 72x115 Ø 19.1x380 265 375 33x34.5 76x131 Ø 21.7x545 265 390 33x34.5 76x131 Ø 19.1x552 270 390 38x40 90x151 Ø 21.7x605 294 470 45x47 106x166 Ø 21.7x605 304 510 51x53 118x180 Ø 21.7x605 304
100 (10) 150 (15) 200 (20) 300 (30) 500 (50)
126 195 126 230 276 163
505 10.5 487 13.2 675 18.7 1,340 37.0 2,940 87.7
- - - -
430 440 475
Ø 52 128x182 Ø 27.2x800 353 Ø 61 142x192 Ø 27.2x800 353 Ø 80 188x237 Ø 27.2x1,000 353
MH-30V-2 MH-50Y MH-100Y
1,000 (100) 305 145
450 Ø 125 265x318 Ø 27.2x1,000 353
Low Profile Bottle Jacks แม่แรงไฮดรอลิค รุ่นตัวสั้น
• These are jacks that facilitate usage in a low position. • They are also widely used in disaster prevention machinery, earthquake reconstruction, and for rental-lease equipment. • Jacking-up is possible from low positions into which standard jacks will not fit.
Raising structures Usage examples
Servicing of large vehicles
MHB-30Y
MHB-10
Horizontal spec. model also available Angle of inclination is within 6°. Range of lift is approximately 50% when used horizontally in connection with the oil level.
Within 6˚
In case of horizontal usage
(Approx. 50%)
In case of normal usage
h. Min. Height (mm)
h1 Lifting Height (mm)
h2 Extension Screw
H Max. Height (mm)
a Socket Dimensions
l x w Base Dimensions
Handle Dimensions
Operating Force
No. of Operations
Required Oil
Gross mass
Specs.
Capacity KN (ton) 100(10) 150(15) 200(20) 300(30)
Order No.
(mm)
(mm)
(mm)
(mm)
(N)
(cc)
(kg)
170 95 170 90 180 85 180 80
75 70 40
340 330
45x47 106x166 Ø 21.7x605 304 51x53 118x180 Ø 21.7x605 304
83
220 6.3 290 7.9 281 9.7 380 13.5
MHB-10 MHB-15 MHB-20 MHB-30Y
109
305 56.5x58 128x182 Ø 27.2x800 353 Ø 61 142x192 Ø 27.2x800 353 260
67 96
-
JSR Entech Catalogue 1223 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook