Measuring Tools
Since the standard cable clip is not sufficient to support the U-WAVE-T on a Digimatic gage, a mounting plate is provided. The mounting plate can be fixed to the gage by the easily detachable hook-and-eye type fasteners provided. Batteries can be replaced without needing to detach the U-WAVE-T from the gage. Measurement Data Wireless Communication System U-WAVE Optional Accessories for U-WAVE-T Measurement Data Management Convenient data collection tool and quality control software U-WAVE-T mounting plate
U-WAVE-T mounting plate for QM-Height Order No.02AZE990 Standard accessories • Detachable fasteners: 1 set • Mounting screw: 2 pcs
Mounting Diagram for QM-Height (02AZE990)
Mounting diagram (02AZE200)
U-WAVE-T
U-WAVE-T Mounting holes *1
Detachable fastener *2
Mounting screws
The detachable fastener is a dual lock fastener (Sumitomo 3M). It is equivalent to detachable double- faced sheet (DK-94, Scotch 3M) commercially available.
Special order U-WAVEPAK (Event drive) This is a special order product. For the latest pricing, please contact your dealer or the nearest Mitutoyo Service Center. Product configuration : Program on CD
Connecting cable
U-WAVE-T mounting plate Order No.02AZE200 Standard accessories • Detachable fasteners : 1 set • Mounting screw 2 pcs.
*1 To avoid damaging the threaded holes in the plastic body of the U-WAVE-T unit, the mounting screws should be tightened only just sufficiently to grip. Repeated removal of these screws should also be avoided for the same reason. *2 In order to avoid loss of adhesion, do not allow oil or coolant to come into contact with the bonding surfaces of the detachable fasteners.
Application examples of the mounting plate Super Caliper CD67-S15PM
QuantuMike MDE-25MX Digimatic Indicator ID-C112XB
Front view
Rear view
Front view
Rear view
Front view
Rear view
For U-WAVE-R, U-WAVE-T and U-WAVE- TC/TM, please purchase the standard model. Install this special order U-WAVE- PAK (Event drive) and gain the ability to perform setups without using the standard accessory U-WAVEPAK. A program to send a data request command is separately required to load data to a PC. Event drive supporting software: • USB-ITPAK V2.1 (timer input enabled) • MeasureReport (function key operation)
Application example of the 'Event drive' mode
For standard type U-WAVE , the currently displayed data can be sent by pressing the data switch. This is called "button drive mode". In the "event drive mode", the measurement value is checked every 0.5 seconds and measurement data is automatically sent if there is a change. At this time, the data switch is disabled. The sent data is written in the U-WAVE-R memory, and only the latest data is kept, it is not output to the PC. The data is loaded to the PC from the U-WAVE-R memory when the data request command is sent. The mode switching between "button drive" and "event drive" is enabled by the special order U-WAVEPAK (Event drive). In the event drive mode, pressing the data switch on the Digimatic gage is not necessary. PC operation enables loading data from multiple gages at once. To perform simultaneous measurement using USB-ITPAK V2.1, a special order U-WAVEPAK (Event drive) is required. Data request support from PC. Special order U-WAVEPAK (Event drive)
Note: There is no linkage between a data request sent from the PC and a data transmission from the Digimatic gage. To trigger data transmission, stop the Digimatic gage first, and then send a data request command from the PC.
Special use Event drive mode
Standard use Button drive mode
Data is sent when the button is pressed.
Data is sent if value changes (Checked every 0.5 s)
U-WAVE-R
When using the event drive please note : • The battery life is shorter than in normal mode. The battery lasts approximately 20 days with continuous use. Switching to the button mode when the battery is not in use extends the battery life. • When using several Digimatic gages (U-WAVE-T) , communication errors may occur because of radio interference in simultaneous measuring. Therefore, it is required to add U-WAVE-R and set different frequencies (15 ch) to avoid radio wave interference.
JSR Entech Catalogue 8
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook