Reference Gauge
Bore Gauge Stand ขาตั้งเบอร์เกจ
• Optimal for efficient measurement of multiple small holes with a bore gage (series 526).
Dimensions
Unit: mm
215-120-10
Specifications Metric Order No.
Measuring table displacement (mm)
Measuring table
Flat measuring table (ø60 mm)
38
215-120-10
Comparator Stand ขาตั้งเบอร์เกจ
• Comparator Stands have a very stable castiron base that enables precise measurement. • The partially serrated anvil prevents very flat workpieces from wringing to it and the 2.3μm flatness (or better) promotes accurate measurement. • The 215-505-10 model has a threaded column which enables easy and precise coarse adjustment. • Serrated anvils 110×110mm are supplied with 215-405-10, and 150×150mm with 215-505-10 models. Dimensions
Unit: mm
215-405-10
Specifications Metric Order No.
Square anvil size (W x D)
Column travel
Stem hole
Remarks
110 x 110mm 150 x 150mm
235mm
Ø8mm, ø9.53mm
With fine adjustment of 1mm range With fine adjustment over the entire travel
215-405-10 215-505-10
275mm ø8mm, ø9.53mm, ø20mm
* Perpendicularity of the mounting hole to the anvil: less than 0.4mm/100mm * Take note that when mounting the high-accuracy Linear Gages (with resolution of 0.1μm or less) to these stands, it may affects the indication value depends on the perpendicularity of the mounting hole to the top surface of the anvils.
Transfer Stand ขาตั้งเบอร์เกจ
Dimensions
• Transfer Stands are designed for comparison measurements of size using a dial indicator or Digimatic Indicator.
519-109-10 (with a serrated anvil)
Specifications Metric Order No.
Stem hole
Remarks
ø8mm, ø9.53mm With serrated anvil
519-109-10
* Perpendicularity of the mounting hole to the anvil: less than 0.4mm/100mm * Take note that when mounting the high-accuracy Linear Gages (with resolution of 0.1μm or less) to these stands, it may affects the indication value depends on the perpendicularity of the mounting hole to the top surface of the anvils.
JSR Entech Catalogue 164
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook