Reference Gauge
Magnetic Base ฐานแม่เหล็ก
Holding Power 800N MB-PB
MB-PR
Holding Power 600N MB-PRW
Holding Power 1000N
Holding Power 1500N MB-PG
Holding Power 1250N MB-PH
Holding Power 1300N MB-PL
※ If a plate is to be installed on the top face (tapped holes provided), be sure to use a nonmagnetic material (e.g. aluminum, SUS304, brass plate). If a magnetic material such as iron is mounted/installed to the top face, the holding power will drop signiti- cantly.
Holding Power 600N MB-PM
MB-PS
Holding Power 300N
Available in a wide range of sizes from minimum and medium to large. These on-off switchable magnetic holder bases meet various application. Usable as a tacking base for equipment, and / or a measuring base for laser use (by installing jigs in the screw holes or, if necessary, with slight additional machining) • Compact in size, yet it delivers a strong magnetic force. • Either a V-slot and/or flat attractive face is provided. The face opposite to the changeover switch face is also attractive. (MB-PH, MB-PM and MB.PS excluded) Although screw holes are provided, some working is possible as shown.
Workable area on magnetic holder base Som working such as drilling is allowed in the area
[mm]
Dimensions
Order No. MB-PB MB-PR MB-PRW MB-PL
Holding power 800N (80 kgf) 1000N (100 kgf) 600N (60 kgf) 1300N (130 kgf) 1250N (125 kgf) 600N (60 kgf) 300N (30 kgf) 1500N (150 kgf)
Tapped Hole
Hold Face Form Rear Face Attraction
Width
Length
Height
58.5
M8 x 1.25 Depth 7
73
50
55
○
117 70 40 34 120
M10 x 1.25 Depth 7 M12 x 1.75 Depth 11 M6 x Depth 6 M5 x Depth 4 M8 x 1.25 Depth 7
70 40 30 50
80 40 35 52
MB-PH MB-PM MB-PS MB-PG
X
○
※ THe holding power applies to SS400, hickness 10 mm and ground surface. ※ MB-PRW is of waterproof construction
JSR Entech Catalogue 178
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook