Reference Gauge
Magnetic Holder Base ฐานแม่เหล็ก
Magnetic Holder Base (Adjustable force Type) ฐานแม่เหล็ก แบบปรับแรงแม่เหล็กได้
This base can be used widely as a magnetic force ON/OFF type magnetic base. It is designed small and is useful as a base for temporarily mounted legs of equipment, sensors and lasers by mounting a jig using tapped holes or by some additional machining. • The base can be mounted and demounted easily using the select lever. • Compact but powerful magnetic force. • Waterproof and oilproof construction.
Suitable as a base for laser and other optical measurement. Because the ON-OFF holding power is adjustable, these are recommended where fine adjustment and accuracy are required.
• Easy ON-OFF operation using the lever. • Thin and powerful magnetic force. • Dry specitication.
MB-L-C75
MB-L-C50
[mm]
MB-0404
Dimensions
[mm]
Order No.
Holding Power
Mounting Hole
A H P
Dimensions
Holding power
Order No. MB-0404
Mounting Hole
Width Height Length
59N (6 kgf)
50 20 25 M4 Depth 6 75 20 35 M4 Depth 6
MB-L-C50 MB-L-C75
200N (20 kgf) or over
40 35 40 4 - M3 Depth 6 (Span 30) ※ The holding power applies to SS400, thickness 25 mm and ground surface.
196N (20 kgf)
※ The holding power applies to SS400, thickness 25 mm and ground surface.
Magnetic Holder Base (Adjustable force Type) ฐานแม่เหล็ก แบบปรับแรงแม่เหล็กได้
Magnetic Ruler Holder แม่เหล็กยึด
Useful for a wide variety of operations; holding down a large ruler on a floor or wall during machining of iron plates, etc. and moving workpieces after cutting or holding and removing chips. • If used at high temperature, the holding power may drop. • For transporting heavy workpieces, Model HL-15 having a reinforced grip to withstand the weight is available.
Suitable as a base for laser and other optical measurement. Because the ON-OFF holding power is adjustable, these are recommended where fine adjustment and accuracy are required.
• Easy ON-OFF operation using the lever. • Thin and powerful magnetic force. • Dry specitication.
• Attachable and detachable easily by changeover lever. • Attractive face is made in V-slot for KM-B1 and in inverted concave for KM-B2.
An example of usage
KM-B1 Holding Power 800N
Holding Power 250N
MB-L-90
Holding Power 65N
MB-L-45
[mm]
KM-B2 Holding Power 1500N
Peripheral tapped hole
Center Tapped Hole
Order No.
W H L
P A b c s d h
65N (6.5kgf) 45 200N (20kgf) 65 250N (25kgf) 90
[mm]
2.5
9
4
15 19 24
MB-L-45 MB-L-65 MB-L-90 MB-L-125
Mounting Hole
M8xP1.25 depth 8 25
Holding Power
20
4
M4 P0.7 6
Order No.
Tapped Hole
Ø 8
Width Length Height
8
10
800N (80 kgf) 1500N (150 kgf)
55.8 55 M 8 x 1.25 Depth 7
KM-B1 KM-B2
6
50
800N (80kgf) 125 30 M16xP1.0 depth 8 50 M6xP1.0 8 36 ※ The holding power applies to SS400, thickness 25 mm and ground surface.
120 52 ※ The holding power applies to SS400, thickness 10 mm and ground surface.
JSR Entech Catalogue 180
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook