Reference Gauge
ECS series Ceramic Pin gauges with handle Ceramic Pin Gauge Set ชุดพินเกจ
Specifications Size (mm) 0.20 • • • 0.49 0.50 • • • 0.99 1.00 • • • 10.00 10.01 • • • 13.00 13.01 • • • 18.00 18.01 • • • 20.00 ECS Series Set No.
Length (mm)
Tolerance Roundness Cylindricity
Gauge
Handle
10 20
พินเกจเซรามิกแบบมีด้าม พินเกจเซรามิคพร้อมด้ามชุด
25 26
±1 µm 0.8 µm
Packages of pin gauges made of fine ceramic (zirconia)
30
: ขนาดขึ้นทีละ 0.01 มิล รุ่น ECS (พินเกจเริ่มต้นที่ขนาด 0.20 มิล)
28
±1.5 µm 1.3 µm
Set Range (0.01mm Step)
No. of Pins
0.20 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50
0.21 0.51 1.01 1.51 2.01 2.51 3.01 3.51 4.01 4.51 5.01 5.51
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
0.49 0.50 0.99 1.00 1.49 1.50 1.99 2.00 2.49 2.50 2.99 3.00 3.49 3.50 3.99 4.00 4.49 4.50 4.99 5.00 5.49 5.50
31
ECS-0A ECS-0B ECS-1A ECS-1B ECS-2A ECS-2B ECS-3A ECS-3B ECS-4A ECS-4B ECS-5A ECS-5B
51
Zirconia - ceramic meterial is the best material available for making pin gauges. Zirconia - ceramic meterial does not rust or corrode, is non - magnetic, and resists abrasion. These features assure you long life and easy handing. ECS Series gauges - - with handle EDP series Packages of pin gauges for measuring gear wheels Pin Gauge for Measuring Gear Wheels ชุดพินเกจสำ �หรับตรวจสอบฟันเฟือง
5.99 6.00 ขนาดนอกเหนือจากนี้ถ้าสนใจกรุณาติดต่อกลับมายังบริษัทฯ
Specifications Tolerance
Roundness Cylindricity
Length (mm)
Hardness HRC
± 1.5 µ m
1.3 µ m
40mm. 50mm more than 58
If you want to know the proper pin gauge diameters, please provide the following information : 1) Whether the pin gauges are for internal or external gear wheels 2) Module or diametric pitch 3) Number of gear teeth 4) Pressure angle 5) Addendum modification coefficient 6) Torsional angle
EDP-1 Series Module mm
For internal gear wheels
For external gear wheels
(V) x (V1) mm 1.00 x 0.84 2.00 x 1.68 2.50 x 2.10 2.40 x 2.00 3.333 x 2.80 5.00 x 4.26 10.00 x 8.40 20.00 x 16.80
(U) mm
0.5 1.0
0.90 1.80 2.25 3.00 4.50 9.00 -
The EDP series pin gauges allow you to easily and quickly measure the over-pin diameters of external and internal gear wheels. The packages in this series are designed to measure the over-pin diameters of gear wheels and involute splines. Each package consists of pins in pairs. EDP-3 SERIES This package is a combianation of the EDP- 1 and EDP-2 For detailed information about the sizes. see the tables for the EDP-1 and EDP-2 They are useful for measurement If magnetized. Separate pin gauges are also available. V. V1. U and pin gauges in special Length are available on request
1.25
1.667
2.5 5.0
10.00
18.00
EDP-2 Series Module mm
For internal gear wheels
For external gear wheels
(V) x (V1) mm 1.50 x 1.20
(U) mm
0.75
1.35 1.40 2.70 3.60 5.40 6.75 7.00 8.10
-
1.5 2.0 3.0
3.00 x 2.52 4.00 x 3.36 6.00 x 5.04 7.50 x 6.30
3.75
-
4.5 6.0 7.5
9.00 x 7.56 12.00 x 10.08 15.00 x12.60
As shown in the above diagram, place the pins directly opposite each other on the gear wheel. The over pin diameter can then be easily obtained by measuring the internal and external dimensions for the two pins.
10.80 13.50
JSR Entech Catalogue 241 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook