Reference Gauge
Taper Pin Gauge Set ชุดพินเกจ
Specifications Tolerance
Roundness
HRC Hardness 58 or more
±2.0 µ m
1.5 µ m
พินเกจแบบเตเปอร์ ETP series Tapered Pin Gauge Set
ETP Series Set No.
Set Range (0.01mm Step)
No. of Pins
0.98 / 1.01 1.98 / 2.01
1.01 / 1.04 • • • 1.97 / 2.00 2.01 / 2.04 • • • 2.97 / 3.00 3.01 / 3.04 • • • 3.97 / 4.00 4.01 / 4.04 • • • 4.97 / 5.00 5.01 / 5.04 • • • 5.97 / 6.00 9.01 / 9.04 • • • 9.97 / 10.00
ETP -1A ETP -2A ETP -3A ETP -4A ETP -5A
• • • 1.94 / 1.97 • • • 2.94 / 2.97 2.98 / 3.01 • • • 3.94 / 3.97 3.98 / 4.01 • • • 4.94 / 4.97 4.98 / 5.01 • • • 5.94 / 5.97 8.98 / 9.01 • • • 9.94 / 9.97
34
ETP -9A
Precision taper gauges providing actual micron measurements istead of go / no-go measurements. • Can measure the stop position and make micron measurements by reading the scale. • The effective gauge length of 60mm is 0.03mm tapered. • The respective sizes are engraved at both ends of the pins. The plastic cases are also marked with the sizes. ※ Gauges also sold individually. Special sizes are also available. ※ Graduations (smallest: 0.005mm) are laser engraved on the sides of ETP-6~9 gauges.
Dimensions
Pin Gauge Set ชุดพินเกจ
This series can calibrate instrumental errors in micrometers. feed errors of spindle screws (example 1). and the parallelism and plane for each 1/4 rotation of spindles and anvils (example 2). The pin gauges come with high-heat-insulation handles. which prevent body heat from affecting performance. and can be internally used to calibrate micrometers and calipers to acquire and maintain ISO-9000 accreditation. The EMC-2-4 can be used in combination with a block gauge to calibrate micrometers of 25~50 mm. It comes with an inspection result certificate. calibration certificate. and traceability structure diagram. Example 1 : Measuring instrumental errors of micrometers and feed errors of spindle screws. Instrumental errors of micrometers can be calibrated by measuring 2.50 mm, 5.00 mm, 10.00 mm, 15.00mm, 20.00 mm and 25.00 mm for comparison with actual measured values. Example 2 : Checking the parallelism and plane for each 1/4 rotation of spindles and anvils. The parallelism and plane of spindles and the parallelism between an anivil and spindle can be calibrated by measuring 5.00 mm, 5.12 mm, 5.25 mm, 5.37 mm, and 5.50 mm of the EMC-1-10 and 25.00 mm, 25.12 mm, 25.25 mm, and 25.37 mm of the EMC-2-4 for comparison with the actual measured values. The package comes standard with actual measurement data. a calibration certificate. and a traceability structure diagram.
พินเกจสำ�หรับสอบเทียบ Micrometer EMC series Pin Gauge Package for calibrating micrometers
Specifications Size (mm) 2.50 • • • 10.00 15.00 • • • 25.37
Length (mm)
Hardness HRC
Tolerance Roundness Cylindricity
±0.3 µm 0.3 µm more than 58 ±0.5 µm 0.5 µm
20
EMC Series Set No
No. of Pins
Sizes
EMC-1-10 2.50, 5.00, 5.12, 5.25, 5.37, 5.50,10.00, 15.00, 20.00, 25.00
10
JSR Entech Catalogue 242 EMC-2-4 25.00, 25.12, 25.25, 25.37
4
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook