Scale, Angles and Level
Cutting Rule ไม้บรรทัดสำ �หรับงานตัด
• For measuring length, drawing lines, and cutting
• Aluminum cutting rule with safety features • Safety wall prevents blade from sliding over.
1m
2m
Length Tolerance Straightness Tolerance
±0.40mm
±0.70mm
Below 0.45mm
Below 0.60mm
Main Part : Aluminum Edge : Stainless steel Stopper : Rubber
Material
Overall Length×Width×Thickness (mm)
Description of Product
Order No.
※ Length tolerance is the accuracy when measured at normal temperature. ※ Straightness tolerance is the warpage of the sides. How to measure straightness
1,020 × 100 × 50 2,020 × 100 × 50
1m/shaku 2m/shaku
65077 65078
Circular Saw Guide Free Angle Neo เครื่องมือนำ�ตัดสำ �หรับเครื่องเลื่อยวงเดือน
• Strong metal screw replaces the plastic one. Will not break. • Fold flat • Easy to turn
• Rigid 3-D structure
• Hollow wide aluminum guide makes it light and durable.
• With a groove for Slider (sold separately, Item Code 78236).
With protector caps to protect material from getting scratched
Just slide it in the groove to prevent shifting during cutting.
Use after inserting to the base of an electric circular saw.
Material
30cm 37cm 45cm 60cm 1cm
Less than 1mm per 300mm
Less than 1.3mm per 370mm
Less than 1.6mm per 450mm
Less than 2.1mm per 600mm
Less than 3.5mm per 1000mm
Perpendicularity (at 90°)
Order No.
Description
Body Size (mm) 465×142×20 535×142×20 615×142×20 765×170×20 1,165×170×20
30cm 37cm 45cm 60cm
73160 73166 73161 73162 73163
Body : Stainless steel, aluminum Stopper Screw : Stainless, brass Protector Cap : Polyacetal resin 1x Cutout positioning stick
Material
Accessory
1m
Circular Saw guide Free Angle Multi เครื่องมือนำ�ตัดสำ �หรับเครื่องเลื่อยวงเดือน
• Slider comes as standard • Easily adjust length and angles • Replacement guides enable to adjust length.
78232
Free Angle Multi with Guide Rule30cm
• Aluminum guide can be locked at any position. • Longer guide helps to cut at an acute angle. ※ 30cm guide comes as standard. 45cm and 60cm guides (sold separately) can be used to extend length. (1 x Cutout positioning stick included)
Body Size (mm) 455×30×5 605×30×5 755×30×5
Order No.
Description
Perpendicularity (at 90˚)
less than 1mm per 300mm
Free Angle Multi with Guide Rule30cm 455×145×23
78232 78233 78234
Body : Stainless steel, Aluminum Stopper screw : Aluminum, Brass
Guide Rule 30cm for Free Angle Multi Guide Rule 45cm for Free Angle Multi Guide Rule 60cm for Free Angle Multi
Material
Accessory
Cutout positoning stick, Stopper screw (flat)
JSR Entech Catalogue 359 78235
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook