Magnetie Tools
Magnetic Block with 2 attractive faces RMAW-2F แม่เหล็กยึดชิ้นงาน
The strongest type of block is provided with 2 faces attractive face.
• The upper and bottom magnetic face can be changed independently. • Because a work piece can be attracted on its side face, work pieces can be fixed vertically, or on 3 faces. ※ In case a work piece is fi xed on upper or bottom face and side faces at the same time, each attractive force is reduced.
RMAW-2F0812
[mm]
Dimensions B L H
Pole Pitch
Order No.
Holding Power 785N (80 kgf)
P
80 120 50 6 (2+4)
RMAW-2F0812
※ The holding power is based on a test piece of □ 50 x t25, S15C.
Magnetic Block KPB แม่เหล็กยึดชิ้นงาน
KPB-2F18
• These blocks can hold workpieces during electric discharge machining, wire cutting and grinding.
• The both sides can hold workpieces and can be turned ON and OFF individually. (2F models) • They are secured to the worktable by turning ON and OFF the magnet. (2F models) • The side faces (ON/OFF select faces) can also hold workpieces. (2F models) • They are secured to the worktable using tapped holes provided on the mounting face. They can also be secured by having them held by a magnet chuck. (1F model) • The operating areas are provided on both side faces to facilitate ON/OFF operation. • They are of waterproof and oilproof construction to allow them to be used in fluid.
KPB-1F18
An example of usage of double-face attracting block
■ Dual face type 2F model
[mm]
Dimensions Pole Pitch B L H P
■ Single face type 1F model
Nominal Dimension
Holding Power
[mm]
Order No. KPB-2F13 KPB-2F18
Dimensions Pole Pitch B L H L1 P
Nominal Dimension
Holding Power
Order No. KPB-1F13 KPB-1F18 KPB-1F25
50 x 125 250N (25kgf) 50 x 180 350N (35kgf) 50 x 250 500N (50kgf)
125 180
52
50 1.5 (0.5+1.0)
50 x 125 250N (25kgf) 50 x 180 350N (35kgf) 50 x 250 500N (50kgf)
125
85
KPB-2F25 250 ※ The holding power is when they hold an SS400, 20-mm thick workpiece (ground surface) over the whole area.
1.5 (0.5+1.0)
52
35 180 110 250 150
Magnetic Mini Chuck KM-JB แม่เหล็กยึดชิ้นงาน
In addition to using it as a fi xing device for small work pieces, it can be used as a block to support 3 parts of a work piece during grinding.
suitable as exclusive fixing jig for round steel of extra-ordinary shape of work pieces!
KM-JB0709
• Holes can be made down to 10mm additionally on each face. (Except the face for on/off operation and rear face) • By using it as exclusive jig to a particular work piece, working performance is improved. • Due to its drip-proof structure, it can be used in liquid such as ED processing.
KM-JB
KM-JB0812
[mm]
Dimensions
Holding Power
Order No. KM-JB0709 KM-JB0812
B
L
H
392N (40 kgf) 883N (90 kgf)
65 80
85
70 90
120
※ However, please avoid making a hol on the part of pin and counter-bore.
※ The holding power is based on a test piece of □ 50 x t25, S15C. ※ The handle is a hexagonal wrench key.
JSR Entech Catalogue 389 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook