Magnetie Tools
Magnetic V Square Block KYB แม่เหล็กยัดชิ้นงาน ร่องวี
• Holding device for marking or light processing. • Holding device for ED process • Holding device for three dimensional measuring machine and various kinds of measuring, measuring system. • The attraction on one face of the upper (V) face is possible. • On/Off lever is detachable. (length of each opposite side of hexagonal hole is 8mm) • Drip-proof and oil resistance type, • Holding derice for ED process
KYB-13A
[mm]
Dimensions
Order No. KYB- 8A KYB-10A KYB-13A KYB-15A KYB-18A KYB-20A
Holding Power
Applicable Diameter
B
H
L
a
180N (18kgf) or over 343N (35kgf) or over 400N (40kgf) or over 589N (60kgf) or over 600N (60kgf) or over 785N (80kgf) or over
∅ 10~ ∅ 32 ∅ 13~ ∅ 50
80
80
80
29 40
100 125 150 180 200
100 125 150 180 200
100 125 150 180 200
∅ 14~ ∅ 66
50
※ The holding power applies to the V-face and ∅ 20 round bar. ※ For accuracy, see the table below.
Magnetic V Square Block KVA แม่เหล็กยัดชิ้นงาน ร่องวี
Holding tools for round bar marking, drilling, tapping and grinding of irregular-shaped workpieces. Holding tools for electric discharge machining and wire cutting. Holding tools for three-dimensional measuring instruments and various measuring systems.
KVA-2A
KVA-1A
• Workpieces can be held on the top face (V face), bottom face, and rear face. • T-handle ON/OFF switch comes attached, but can be removed. • They are of waterproof and oilproof construction. • Holding derice for EDM and wire cutting
[mm]
Dimensions B H L a
Applicable Diameter
Order No.
Holding Power 300N (30 kgf) or over 450N (45 kgf) or over 700N (75 kgf) or over
80
KVA-1A KVA-2A KVA-3A
∅ 8~ ∅ 50 60 73
125 180
38
※ The holding power applies to the V-face and ∅ 20 round bar. ※ For accuracy, see the table below.
JSR Entech Catalogue 391 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook