Magnetie Tools
Magtap แท่นแม่เหล็กสำ �หรับอุปกรณ์ไฟฟ้าและต๊าป
Portable, compact, magnetic drill stand.
A tool designed to facilitate tapping of prepared holes in iron and steel plates, secured with strong magnetic holding by the Magtap. Available in two models: permanent magnet and electromagnet. Tapping can be done either with a manual hand turning tapper, or an electric tapper. • Provides a stable mounting position/posture, ensured by strong holding power, for easy tapping. ■ MTP-6A • 13A ⟪ Manual tapping type ⟫ • Small and light weight for easy transportation. • The tap guide holder to facilitate accurate tapping in horizontal and vertical faces. • Wear and damage of taps can be prevented. • The magnet used is a strong permanent magnet. ■ MTP-25A ⟪ Manual turn latchet type ⟫ • Tapping can be done only by operating the latchet lever. • The magnet used is a strong electromagnet. ■ MTP-MT8 ⟪ Electric type ⟫ The revolution can be varied steplessly according to tap sizes. • Small and light weight for easy transportation. • When removed from the mounting fixture, the tapper becomes an electric drill. ■ MTP-MT16 ⟪ Electric type ⟫ • Speedy tapping can be achieved by the impact method. • The back-forth and right-left adjusting mechanism is incorporated. • When removed from the mounting fixture, the tapper becomes an electric drill. (The main unit is the same as Kanetec Magbore KCD-1NA, but the lock handle faces an opposite direction.)
Fully cover from smaller to larger diameter taps.
MTP-25A
MTP-13A
MTP-MT16
MTP-MT8
Parts for sale !
An example of usage
[mm]
Power Consumption
Dimensions
Tap Feeder
Applicable Tap Range
Max. Stroke
Magnet form
Holding Power
Power Source
Turning Angle
Back/Forth Movement
Order No.
Magnet Tapper Magnet
Height
M3-M6 M6-M12
MTP-6A MTP-13A MTP-25A MTP-MT8 MTP-MT16
60 Permanent Magnet 0.8kN (80 kgf)
-
-
∅ 50x60x55 210
-
Manual
-
-
M10-M24 85 M3-M8 100 M8-M16 140
6kN (600 kgf) 3.5kN (350 kgf) 8kN (800 kgf)
30W
∅ 116x75 360 ∅ 104x60 (440) 240
Singlephase 100 VAC
Electro Magnet
285W 360W
Motor
34W
∅ 142x70 (390) 355 320°
30
※ The power cable included is 5 m long for MTP-25A and MTP-MT16 and 2 m long for MTP-MT8. ※ For Model MPT-MT, use a taper hand tap or plug hand tap. ※ MTP-MT16 requires tap holders suitable for tap sizes, which are optionally available. (See the figures below.) installed. ※ The fi gures in ( ) in “Height”are the height with the electric tapper ※ The holding power applies to SS400, 25 mm thick mill scale surface.
JSR Entech Catalogue 396
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook