Magnetie Tools
Electro Magnetic Holder KE-B แม่เหล็กยึดชิ้นงาน
Used in automated manufacturing lines as the magnetic force can be turned on and off or increased or decreased by remote operation via a rectifier (to be installed additionally).
You can use these holders for a wide range of operations such as material feed for automatic press, prevention of deflection for shearing material, and various automatic processes, as well as the holding hands of industrial robots. • Special cables that have specially high durability against bending and vibration are used (Employed in all models except for KE-1B.) • Electrical control can be used for turning on and off the magnetic force and for remote on/off control. • Usable for continuous operation. • Finished by plating.
KE-5B
KE-3B
KE-2B
KE-4B
KE-1B
Rust and scratches on the attractive face aff ect the holding power adversely. Repair it periodically. Precautions for use
Controller required additionally
[mm]
Hole Dimensions
Power Cord Voltage Current Working Rate Applicable Rectifier
Max. Holding Power 8N (0.8 kgf) 28N (2.8 kgf)
Order No.
Dimensions
M1
M2
P1 C P2
∅ 10 x 30 ∅ 20 x 40
-
-
6 VDC 0.18A
KR-T101A-6/24 KR-T101A-6/24 KR-T103A-24 RH-M102C-24 RH-M105B-24
KE-1B KE-2B KE-3B KE-4B KE-5B KE-6B KE-7B KE-8B KE-9B
M4 x 0.7 Depth 6 M6 x 1.0 Depth 12
-
-
7 8
0.07A 0.19A 0.24A 0.12A 0.19A 0.20A 0.26A 0.35A
∅ 30 x 40 180N (18 kgf) ∅ 40 x 40 400N (40 kgf) ∅ 50 x 50 600N (60 kgf) ∅ 60 x 60 1100N (110 kgf) ∅ 70 x 60 1500N (150 kgf) ∅ 80 x 60 2000N (200 kgf) ∅ 90 x 60 3300N (330 kgf)
∅ 4 Depth 2 10 ∅ 4 Depth 3 15
∅ 3.7
24 VDC
8.5 10 12
100% ED
KR-N101A RH-M210B KR-N103A RH-M102C RH-M105B RH-M205B
M8 x 1.25 Depth 15 ∅ 5 Depth 4 18
∅ 6.2
90 VDC
20
M10 x 1.5 Depth 15 ∅ 6 Depth 6
15
※ B type: Cord length 0.3 m (0.25-m lead for KE-1B only) ※ The maximum holding power of models KE-1B to 4B applies to SS400, 10 mm thick, ground test piece held on the whole area and for KE-5B to 9B, applies to SS400, 20 mm thick, ground test piece held on the whole area. ※ For KE-3B to 9B, a drip-proof type is also available. 1N ≒ 0.1kgf
Electro Magnetic Holder KE-D • E แม่เหล็กยึดชิ้นงาน
Thin type electromagnetic holders suitable for a robotic hand as they provide vertical motion in a certain range in limited space.
KE-2D
KE-3E
KE-4E
• Special cables that have specially high durability against bending and vibration are used (Employed in all models except for KE-2D.) • Usable for continuous operation. • Finished by plating.
Rust and scratches on the attractive face aff ect the holding power adversely. Repair it periodically. Precautions for use
Controller required additionally
[mm]
Power Cord Voltage Current Working Rate Applicable Rectifier
Hole Dimensions
Order No.
Dimensions Max.Holding Power
M1
M2
P1 C P2
KR-T101-6/24 KR-T103-24 RH-M102B-24 RH-M105A-24
∅ 20 x 25 18N (1.8kgf) M4×0.7 Depth 8 ∅ 2.1 Depth 2.5 7.5 - -
0.04A 0.085A 0.12A 0.044A
KE-2D KE-3E KE-4E KE-5E
∅ 30 x 25 80N (8kgf) ∅ 40 x 25 220N (22kgf) ∅ 50 x 30 490N (50kgf) ∅ 60 x 30 880N (90kgf)
∅ 4 Depth 2 10 ∅ 4 Depth 2.5 15 ∅ 5 Depth 3 18 ∅ 5 Depth 4 20
7.5
24 VDC
M4×0.7 Depth 12
100% ED
8
∅ 3.7
KR-N101A RH-M105B KR-N103A RH-M205B RH-M102C RH-M210B
9.5 11
M4×0.7 Depth 15
90 VDC
KE-6E 0.065A ※ E type: Cord length 0.3 m (0.2-m lead for KE-2D only) ※ The maximum holding power applies to SS400, 10-mm thick, ground-fi nished test piece held on the whole area. 1N ≒ 0.1kgf
JSR Entech Catalogue 399 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook