Magnetie Tools
Dedicated to electromagnetic holders Terminal Wiring Drawing Magnetic Controller Model RH-M ตู้ควบคุมแม่เหล็กยึดชิ้นงาน
These are important, breakthrough products that can make standard electromagnetic holders respond to higher speed work handling by robot hands, etc.
• The residual holding power, a factor to delay workpiece attaching and detaching, can be eliminated quickly to speed up the lines that use standard electromagnetic holders. (The demagnetizing time may become longer depending on materials of workpieces.) • External operation is possible. • It can be used to attract and transport one iron plate only from stacked ones by voltage adjustment or to take one piece of part only from several pieces in a bucket, e.t.c. Connect operating signals to the terminal TB2. Connect the dry “a” contact of a relay or switch to be provided by the customer to between the terminal (COM) and each of the operating signal terminals ~ . For all operating signals, use a one shot no voltage “a” contact signal, approx.100 ms (standard).
RH-M102C
Precautions for use • The rectifi er KR Series and RH Series use electronic PC boards and small relays inside the rectifi ers and therefore, are not suitable for use, for example, on cranes where they are subjected to vibrations constantly. For installation in places that are subjected to constant vibrations, anti-vibration measures need to be taken. The RH Series external signal input wires must be shielding wires and must be limited to 10 m long maximum. • With regard to failures due to use of holders made by other manufacturers, we may not be able to answer technical questions. Such use also voids the warranty even if a failure occurs within the warranty period.
[mm]
Input
Output
Dimensions
Demagne Function
Order No.
Applicable Holder
Voltage
Voltage Current
Width
Depth
Height
KE-5B~9B KE-5E,6E KE-V510~830 KE-M KE-2B~4B KE-2D~4E KE-KA KE-V306~312 KE-2R~4RA KE-5B~9B KE-5E,6E KE-V510~830 KE-M
DC 0~90V 2A
145
90V
RH-M102C
Single-phase 100 VAC ±10% 50/60Hz
260
DC 0~24V
24V
RH-M105B-24
175
Provided
5A
170
DC 0~90V DC 0~90V
RH-M105B RH-M205B RH-M210B
90V
Single-phase 200 VAC ±10% 50/60Hz
10A
282
290
JSR Entech Catalogue 402
※ 1… The rectifi er for KE-1B is KR-T101-6/24A only. The rectifiers for KEP-3C~9C are KR-T101-6/24 and KR-T103-24 only.
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook