Magnetie Tools
Permanent Magnetic Holder Model KM แม่เหล็กถาวรสำ �หรับยึดชิ้นงาน
An example of application
Arrows indicate the attractive face.
These holders can be used to hold pieces cut out by a wire to prevent such pieces from affecting the remaining parts or from falling.
KM-0018J
KM-0025H
KM-0018H
■ OD “h” Tolerance
[mm]
Machinable Range
Dimensions
Holding Power
Surface Treatment
Tapped Hole
Max. Temperature
Order No.
Tapping
“h” Tolerance
Height Tolerance
OD × Height
D1 D2 H1 H2
∅ 5 x h7 x 8 0 -0.012 None 0.3N (0.03 kgf)
5 4.5 7 6.5 10 9.5 15 14 20 18
KM-0005 KM-0007 KM-H001 KM-H0015 KM-H002 KM-H0025
8 7 Type B Not possible
0.4N (0.03 kgf) 8N (0.8 kgf) 20N (2 kgf) 40N (4 kgf) 100N (10 kgf)
∅ 7 x h7 x 8 0 -0.015 ∅ 10 x h9 x 15 0 -0.036 ∅ 15 x h9 x 15 0 -0.043 ∅ 20 x h9 x 15 0 -0.052 ∅ 26 x h9 x 25 0 -0.052
None None
Prepared hole up to 3.0 deep possible on the back
15 12
0 -0.1
Type A
Prepared hole up to 4.0 deep possible on the back
26 24 25 21
※ The holding power applies to SS400, thickness 10mm and ground surface. ■ Plating
[mm]
Machinable Range
Holding Power
Surface Treatment
Tapped Hole
Max. Temperature
Order No.
OD × Height
Tapping
D1 D2 H1 H2
∅ 5 x 13 1.8N (0.18kgf) ∅ 7 x 13 4N (0.4kgf) ∅ 10 x 8 3N (0.3kgf)
5 4.5 7 6.5
KM-0005L KM-0007L KM-0010H KM-001 KM-T001 KM-0015 KM-T0015 KM-0018H KM-002 KM-T002 KM-0025H KM-T0025 KM-T003
13 10 Type A
Not possible
None
-
-
-
-
Type B
Prepared hole up to 3.0 deep possible on the back Prepared hole up to 3.0 deep possible on the back Provided
∅ 10 x 15 ∅ 10 x 18 ∅ 15 x 15 ∅ 15 x 18
15 18 15 18
8N (0.8kgf)
10 9.5
M5 Depth 5 P 0.8
12 Type A
None
20N (2kgf)
15 14
Nickel plating
M5 Depth 5 P 0.8
Provided
∅ 18 x 8 50N (5kgf)
-
-
-
-
Type B
Not possible
None
Prepared hole up to 3.0 deep possible on the back
∅ 20 x 15 ∅ 20 x 18
15 18
40N (4kgf)
20 18
12 Type A
M5 Depth 5 P 0.8
Provided
∅ 25 x 10 90N (9kgf) ∅ 26 x 30 100N (10kgf) ∅ 30 x 33 150N (15kgf)
None
-
-
-
-
Type B
Not possible
M6 Depth 10 P 1.0 26 24 30 21 M6 Depth 8 P 1.0 30 27 33 28
Type A
Provided
※ The holding power applies to SS400, thickness 10mm and ground surface. ■ Peripheral knurling
[mm]
Order No. KM-0010J KM-0018J
OD × Height
Holding Power
Facial Treatment
Tapped Hole
Max.Temperature
Features
∅ 10 × 8 ∅ 18 × 8 ∅ 25 × 10
3N (0.3kgf) 50N (5kgf)
Nickel plating
None
Type B
Peripheral knurling
KM-0025J 90N (9kgf) ※ The holding power applies to SS400, thickness 10mm and ground surface.
Arrows indicate the attractive face. Industry first!! Stainless steel design, resists rust. Machining is possible up to 0.5 mm on attractive face side.
KM-0018H-SUS KM-0025H-SUS
KM-0010H-SUS
Comparison in pure water left : made of stainless
■ Stainless steel design
[mm]
Order No.
OD × Height
Holding Power 3N (0.3kgf)
Facial Treatment
Tapped Hole Max. Temperature Tapped Hole
∅ 10 × 8 ∅ 18 × 8 ∅ 25 × 10
KM-0010H-SUS KM-0018H-SUS KM-0025H-SUS
50N (5kgf)
None
None
Type B
Not possible
90N (9kgf) ※ The holding power applies to SS400, thickness 10mm and ground surface .
JSR Entech Catalogue 404
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook