Magnetie Tools
Permanent Magnetic Holder Model KM แม่เหล็กถาวรสำ �หรับยึดชิ้นงาน
Arrows indicate the attractive face.
The T type bolt is optionally supplied.
for KM-04C,05C Unit Price 105.-
for KM-025C,03C Unit Price 95.-
KM-06S
KM-04C
KM-05C
KM-025S
KM-025C
■ Painting
[mm]
Machinable Range Max.
Tapped Hole
Order No. KM-025C KM-03C KM-04C KM-05C KM-025S KM-06S
OD × Height Holding Power Facial Treatment
Tapping
Temperature
D1 D2 H1 H2
26 25 30 27
∅ 26 x 25 100N (10 kgf) ∅ 30 x 25 150N (15 kgf) ∅ 40 x 30 300N (30 kgf) ∅ 50 x 40 500N (50 kgf) 26 x 26 x 25 100N (10 kgf) 26 x 60 x 25 200N (20 kgf)
M6, depth 8
25 17
Provided
40 36 30 20 50 46 40 25
Painting
M8, depth 12
Type C
None 26 M6, depth 10 60
Prepared hole up to 3.0 deep possible on the back
25 25 15
Provided
※ The holding power applies to SS400, thickness 10mm and ground surface.
Announcing a new heat resistant type permanent magnetic holder. Permanent Magnetic Holder Model KM แม่เหล็กถาวรสำ �หรับยึดชิ้นงาน
It is suitable to be used as Fixing Jig for such working site as in ship building or welding where heat is generated. In addition, it can be used to fix drawing, scale, small parts.
Upper red arrow indicates attractive force.
• Heat resistance specifications up to 350 ˚C to use. • Screw holes are provided on its rear face and can be used widely by assembled with jig.
KM-T004T
KM-T005T
■ Painting
[mm]
Order No. KM-T004T KM-T005T
OD × Height
Holding Power 300N (30kgf)
Facial Treatment
Tapped Hole M8, depth 10 pitch1.25
Max. Temperature
Tapping
∅ 40 x 40 ∅ 50 x 45
MAX. 350 °C
Provided
Painting
500N (50kgf) ※ The holding power applies to SS400, thickness 10mm and ground surface.
Permanent Magnetic Holder Model KM แม่เหล็กถาวรสำ �หรับยึดชิ้นงาน
Heat resistance temperature 350 degree C
Most suitable for wiring small diameter cord, cord for thermo couple and so on. In addition, it can be used as temporary fixing jig when welding.
KM-HT05
An example of mounting
holding face
• Provided with grooves of 3mm, 6mm width on the bottom face, it can be used in accordance with each diameter. (Width and depth can be additionally processed up to 12mm in maximum.) • By tightening clamping bolt, cord can be fixed without fail.
[mm]
Msgnetic Base Holding Power ∅ 50 x 35 196N (20 kgf)
Width of R groove
Power Cord
Order No. KM-HT05
3mm 6mm under ∅ 5
※ The holding power applies to SS400, thickness 10mm and ground surface.
JSR Entech Catalogue 405 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook