Magnetie Tools
Hexagonal Permanent Magnetic Holder แม่เหล็ก 6 เหลี่ยมขนาดเล็ก
KM-RT10
This holder is used as a jig. This holder is used for transporting light workpieces in manufacturing lines, etc.
KM-RB10 KM-RB14
KM-RT14
• This holder can be easily attached to any place, since its top end is threaded. • When used in combination with the plate (type with plate) as an accessory, the holders can be installed in places where tapped holes can not be opened. • Since this holder is plated with nickel, it can be used under various circumstances.
Order No. KM-RB10 KM-RB14 KM-RT10
Holding Power 10N (1 kgf) 40N (4 kgf) 10N (1 kgf)
KM-RT14 40N (4 kgf) ※ The holding power applies to SS400, thickness 10mm and ground surface.
Mangnetic Holder KOK แม่เหล็กยึดชิ้นงาน
Versatile holders having four attractive faces to meet various applications. These holders also have threaded holes to enable fixtures to be mounted for connection.
KOK-2
KOK-1
[mm]
Dimensions B L H
Order No.
Holding Power 200N (20 kgf) 300N (30 kgf)
Tapped Hole
17.0
KOK-1 KOK-2
50 40
M5 x 0.8
27.6 ※ The holding power applies to SS400, thickness 10mm and ground surface.
Mangnetic Holder KOC แม่เหล็กยึดชิ้นงานแบบมีที่แขวน
Most suitable for holding welding cable,for putting fixures in order on work sites of shipbuilding, iron and steel manufacturing, birdge building, canneries and similar operations.
KOC-1A
[mm]
• Strong holding power capable of destacking stacked thin iron sheets. • Lateral sliding resistance of 80N (8kgf) gives the hanger good holding power.
Dimensions Length Width Height
Order No.
Holding Power
300N (30 kgf)
50
27.6
40
KOC-1A
※ The holding power applies to SS400, thickness 10mm and ground surface. ※ Height of hook part 87 mm.
Mangnetic Holder KOC แม่เหล็กยึดชิ้นงานแบบมีด้ามแขวน
Powerful magnetic hanger holder most suitable for cable arrangement and provisional wiring work on sites. Applicable to a wide range of uses as a hanger, since it powerfully attaches sheets, steel lockers, refrigerators, etc.
Strong type KOC-70
KOC-80
Dedicated hanger included.
[mm]
Order No. KOC-70 KOC-80
Holding Power 130N (13 kgf) 300N (30 kgf)
Dimensions Hanger Setting Screw
∅ 66 × 11
M6 × 1.0
∅ 80 × 13 ※ The holding power applies to SS400, thickness 10mm and ground surface.
JSR Entech Catalogue 406
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook