Magnetie Tools
Spiral Magnetic Conveyor สายพานลำ�เลียงเศษเหล็ก
Widely used as a means to transfer chips produced from machining by machine tools to a point of collection. If oil is sticking to chips, they can be degreased by letting oil drop naturally when chips are being transferred. In particular, this model is suitable for transferring chips from gear cutting machines, end milling machines and milling machines. This model can also be used for continuous transfer of granular parts. ■ Superb durability and safety Simple construction and practically no maintenance required. Since the mechanically moving (rotating) parts are housed in the enclosed cylinder, there is no fear of accidents due to collision. ■ Economical functions High processing capacity and high transfer efficiency. As chips are carried by the spiral slide movement, their movement causes sticking oil to drop off effectively. There is no place where oil stays and therefore oil natural drop is ideal to improve the efficiency of collection of liquid. ■ Low running cost Only a slight amount of power is required to drive the rotation. Most of the work is handled by the permanent magnets. ■ For other special lengths, please contact us. The length can be increased in units of 100 mm. ■ The waterproof feature enables collection of chips in liquid. ■ The motor is not waterproofed. Keep it away from water.
The spiral magnetic conveyor motor slowly rotates the internal shaft with spirally arranged magnets inside the nonmagnetic stainless steel cylinder. Magnetic chips/pieces attracted on the outside of the cylinder are transferred in a sliding motion.
A guide for selection of models Machine Tool
Grinding machine
Drilling machine Lathe
Milling machine Gear cutting machine Broaching machine Special machine
Short cylindrical and helical
Skew and helical
Long cylindrical and helical
Spiral and helical
Spiral
Ribbon shaped
Tangled Flat and helical
Curled Crushed Fine iron powder
Shape of Chips
Magnetic Chip Conveyorr MCO • MCOL Spiral Magnetic Conveyor KSC • KSCT
○ ○ ○ ○
○
○
○ ○
○ ○ ○ ○ ○ ○
Magclean MS–F • MS–BS Chip Magclean CMS
○
○
○
○ ○ ○
※ Applicable range: Chips longer than 60 mm cannot be handled regardless of their shapes. ※ For selection, sample tests are required. Super Small Size Series
[mm(in)]
Dimensions
Processing Capacity
Power Source Motor Revolution
Order No.
Nominal Size
Mass 73384
L L 3 KSC - W0340 Ø25 (1.96) × 400 (15.7) 400 (15.7) 547 (21.5) 315 (12.4) 1 L 2 KSC - W0360 Ø25 (1.96) × 600 (23.6) 600 (23.6) 747 (29.4) 515 (20.2) KSC - W0380 Ø25 (1.96) × 800 (31.5) 800 (31.5) 947 (37.2) 715 (28.1)
Approx.3.0kg/6.61 lb Approx.3.5kg/7.71 lb Approx.4.0kg/8.82 lb
100 VAC (50/60Hz)
2kg/h
6W 10/12rpm (50/60Hz)
Small Size Series
[mm(in)]
Dimensions
Processing Capacity
Power Source Motor Revolution
Order No.
Type
Nominal Size
Mass
L
L 2
L 3
1
Standard Ø50 (1.96) × 500 (19.6)
Approx.6.0kg/13.2 lb Approx.7.0kg/15.4 lb Approx.10.0kg/22.4 lb Approx.11.0kg/24.4 lb Approx.14.5kg/30.8 lb Approx.16.0kg/35.2 lb
KSC -W0505 KSC -W0510 KSCT -W0505 Gutter included KSCT -W0510 Gutter included KSCT -W0515 Gutter included Medium Size Series KSC -W0515
551 (21.6)
725 (28.5) 1215 (47.8) 1705 (67.1)
350 (13.7) 840 (33.0) 1330 (52.3)
3-phase 200/220 VAC
Standard Ø50 (1.96) × 1000 (39.4) 1041 (40.9) Standard Ø50 (1.96) × 1500 (59.0) 1531 (60.2)
60kg/h
25W 30/36rpm (50/60Hz)
[mm(in)]
Dimensions
Processing Capacity
Power Source Motor Revolution
Order No.
Type
Nominal Size
Mass
L
L 2
L 3
L 4
1
Standard Ø76.3 (3.00) × 500 (19.6) 514 (20.2) Standard Ø76.3 (3.00) × 100 (39.4) 1014 (39.9) Standard Ø76.3 (3.00) × 1500 (59.0) 1514 (59.6) Standard Ø76.3 (3.00) × 2000 (78.7) 2014 (79.2)
Approx.6.0kg/13.2 lb Approx.7.0kg/15.4 lb Approx.6.0kg/13.2 lb Approx.7.0kg/15.4 lb Approx.10.0kg/22.4 lb Approx.11.0kg/24.4 lb Approx.14.5kg/30.8 lb Approx.16.0kg/35.2 lb
KSC -W0705 KSC -W0710 KSCT -W0705 Gutter included KSCT -W0710 Gutter included KSCT -W0715 Gutter included KSCT -W0720 Gutter included Large Size Series KSC -W0715 KSC -W0720
656 (25.8) 1156 (45.5) 1694 (66.6) 2194 (86.3)
270 (10.6) 142 (5.59) 770 (30.3) 1270 (49.9) 180
25W
3-phase 200/220 VAC
30/36rpm (50/60Hz)
90kg/h
(7.08)
40W
1770 (69.6)
[mm(in)]
Dimensions
Processing Capacity
Power Source Motor Revolution
Order No.
Type
Nominal Size
Mass
L
L 2
L 3
L 4
1
Standard Ø114.3 (4.49) × 1000 (39.4) 1021 (40.1) Standard Ø114.3 (4.49) × 1500 (59.0) 1516 (59.6) Standard Ø114.3 (4.49) × 2000 (78.7) 2011 (79.9) Standard Ø114.3 (4.49) × 2500 (98.4) 2506 (98.6) Standard Ø114.3 (4.49) × 3000 (118.1) 3001 (118.1)
Approx.35.0kg /77.1 lb Approx.40.0kg /88.2 lb Approx.46.0kg /101.4 lb Approx.54.0kg /119.0 lb Approx.56.0kg /123.4 lb Approx.67.0kg /147.7 lb Approx.81.0kg /178.6 lb Approx.78.0kg /171.9 lb Approx.95.0kg /209.4 lb
KSC-W1110 KSC-W1115 KSCT-W1110 Gutter included KSCT-W1115 Gutter included KSCT-W1120 Gutter included KSCT-W01125 Gutter included KSC-W1120 KSC-W01125 KSC-W1130
1201 (47.2) 1696 (66.7) 2191 (86.2) 2708 (106.6) 3203 (126.1)
770 (30.3) 1270 (49.9) 1770 (69.9)
180 (7.08)
40W
3-phase 200/220 VAC
30/36rpm (50/60Hz)
250kg/h
2260 (88.9) 202 (7.95)
60W
2760 (108.6)
JSR Entech Catalogue 414 KSCT-W1130 Gutter included
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook