Magnetie Tools
Magsupporter แม่เหล็กสำ �หรับงานเชื่อม
Suitable for mating and keeping stationary jointing parts of iron sheets and members during welding work.
MT-A-4
MT-A-2
[mm]
Holding Dimensions Width Length Height
Order No.
Holding Power 800N (80 kgf) ×2
Angle
50 60 55 45° - 135°
MT-A-2 MT-A-4
1500N (150 kgf) ×2 60 120 52 30° - 90°
※ The holding power applies to SS400, thickness 10mm and ground surface.
Welding Clamper แม่เหล็กสำ �หรับงานเชื่อม
Suitable as holding tools for tentative installation and tack welding on such work sites of construction, bridge, ship building and piping.
An example of usage
WK-3A
[mm]
Maximum Temperature
Order No.
Holding Power
60°C
WK-3A WK-T3A
1000N × 2
180°C ※ The holding power applies to SS400, thickness 10mm and ground surface.
Magnetic Holder แม่เหล็กสำ �หรับงานเชื่อม
Suitable for tentative holding during drilling and assembly.
Usable as a hinge of thin plates and simple jig for welding operations.
• Two magnets as a pair for easy angle setting. • An angle scale provided. (KM-12W) • The magnetic force can be turned on and off by operating the lever. (KM-12W) • The V-groove allows the holder to be attached to certain poles and curved surfaces in addition to the flat surface. (KM-12W)
KM-12W
KM-06W
[mm ]
Holding Dimensions Width Length Height
Order No. KM-06W KM-12W
Holding Power
Angle Length
200N (20 kgf) 1300N (130 kgf)
26 60 25 129
Free
50 117 55 273 ※ The holding power applies to SS400, thickness 10mm and ground surface.
JSR Entech Catalogue 422
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook