Magnetie Tools
Hexagonal Magnetic Holder แม่เหล็กสำ �หรับงานเชื่อม
These holders provide a strong holding power for tentative holding during welding and tentative assembly. These holders can also be used as a block.
KM-S1A
• The holding angle can be set to 45˚, 90˚ and 135˚. • The small type is equipped with a pushbutton and the arge type with a rotary handle for turning on and off the magnetic force.
KM-SA
[mm]
Holding Power
Order No.
Dimensions
Round Steel 600-900N (60-90 kgf) {150-200N (15-20 kgf) } 200-300N (20-30 kgf) { 50-70N (5-7 kgf) }
Steel Plate 1200-1400N (120-140 kgf) { 800-1000N (80-100 kgf) } 200-600N (20-60 kgf) { 100-350N (10-35 kgf) }
112 × 112 × 94
KM-SA
60 × 60 ×42
KM-S1A
※ The holding power applies to iron plate, SS400, 10mm thickness, and groundsurface. Note : The holding power in { } is for attraction on one face in the case of double-face attraction.
Hexagonal Magnetic Holder แม่เหล็กสำ �หรับงานเชื่อม
Usable to temporarily hold and assemble workpieces during welding. These holders hold workpieces firmly.
• The workpiece holding angle can be selected from 15˚, 45˚, 60˚, 90˚, 105˚ and 120˚. • The magnetic force can be turned on and off . • The holding power on steel plates is about the same as when both faces of KM-S9 and S12 are used and at angles other than 105˚, the holding power does not drop when two faces are used.
KM-S10
KM-S13
[mm]
Holding Power
Order No.
Dimensions 104×95×67
Steel Plate
150-250N (15-25 kgf) 250-450N (25-45 kgf)
KM-S10 KM-S13
132×120×73 ※ The holding power applies to iron plate, SS400, 10mm thickness, and ground-surface.
Hexagonal Magnetic Holder แม่เหล็กสำ �หรับงานเชื่อม
These holders are used for tack welding and tentative assembly during welding and assembly work. They can be used in wide applications as they hold round pipes and round steel.
KM-S9
KM-S12
• The holding angle can be set to 45˚, 90˚ and 135˚. • Compact and handy. Lower cost and simpler than the hexagonal holder KM-S. • The concave attractive face can hold certain round steel.
[mm]
Holding Power
Order No.
Dimensions Dia of round Steel
Round Steel Steel Plate
100-200N (10-20 kgf) {50-100N (5-10 kgf)} 250-400N (25-40 kgf) {150-250N (15-25 kgf)}
150-500N (15-50 kgf) {100-300N (10-30 kgf)} 250-700N (25-70 kgf) {200-500N (20-50 kgf)}
90 x 90 x 14 min ∅ 10
KM-S9
120 x 120 x 26 min ∅ 24
KM-S12
※ The holding power applies to iron plate, SS400, 10mm thickness, and groundsurface. Note : The holding power in { } is for attraction on one face in the case of double-faceat- traction.
JSR Entech Catalogue 423 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook