Magnetie Tools
Mini Type Magbore แท่นแม่เหล็กสำ �หรับอุปกรณ์ไฟฟ้า
Circular magnet is turnable up to 320°. You can even drill thin steel sheet by placing backing material beneath the sheet • A portable version of the bench drilling machine. Capable of drilling 20-mm holes in workpieces 20 mm or thicker.
Portable magnetic force holding drilling machine with round electromagnet
KCD-MN2
(Unit : mm)
Power Source
Dimensions
Applicable Drill
Drill Dia
Allowable Drilling Force Holding Power
Max. Stroke
Turning Angle
Fine Length
Order No.
Voltage
Power
Magnet Height
6.5 1.5~6.5 Single Phase 220VAC -
1kN (100 kgf) 3.5kN (350 kgf) ∅ 105 x 60 240 100
-
-
KCD-MN2-2201 KCD-1NA-2201
10~13 1.5~13 Single Phase 220VAC 34W 4kN (100 kgf) 8kN (350 kgf) ∅ 142 x 70 355 140 320° 30
※ Electric Drill are Optional. ※ Cord length 2m (for KCD-MN2 mode) ※ Cord length 5m (for KCD-1NA mode) ※ The holding power applies to black plate of SS400 and thickness 10 mm.
(ราคาไม่รวมสว่านไฟฟ้า
■ List of applicable electric drills by models of Magbore
(Makers in alphabetical order)
Magbore
Hitachi
Makita
Ryobi Towa
Toshiba
KCD-MN2, KCD-MNV1, KCD-MNC1
6.5LUh-7, DG-6, 6.5LUh-DH4 10 NU-DH4, 13 BU-PN3, 13 BUL-SH3
KCD-1NA DRD-10C, DRD-13C ※ There are various mounting metals. When purchasing a Magbore, please provide us with information about the manufacturer of the electric drill to use and its model No. ※ Mounting metals for drills other than Hitachi drills are supplied at extra cost. 10 6010N
Magtap แท่นแม่เหล็กสำ �หรับอุปกรณ์ไฟฟ้าและต๊าป Portable, compact, magnetic drill stand. Fully cover from smaller to larger diameter taps.
A tool designed to facilitate tapping of prepared holes in iron and steel plates, secured with strong magnetic holding by the Magtap. Available in two models: permanent magnet and electromagnet. Tapping can be done either with a manual hand turning tapper, or an electric tapper. • Provides a stable mounting position/posture, ensured by strong holding power, for easy tapping. ■ MTP-6A • 13A ⟪ Manual tapping type ⟫ • Small and light weight for easy transportation. • The tap guide holder to facilitate accurate tapping in horizontal and vertical faces. • Wear and damage of taps can be prevented. • The magnet used is a strong permanent magnet. ■ MTP-25A ⟪ Manual turn latchet type ⟫ • Tapping can be done only by operating the latchet lever. • The magnet used is a strong electromagnet. ■ MTP-MT8 ⟪ Electric type ⟫ The revolution can be varied steplessly according to tap sizes. • Small and light weight for easy transportation. • When removed from the mounting fixture, the tapper becomes an electric drill. ■ MTP-MT16 ⟪ Electric type ⟫ • Speedy tapping can be achieved by the impact method. • The back-forth and right-left adjusting mechanism is incorporated. • When removed from the mounting fixture, the tapper becomes an electric drill. (The main unit is the same as Kanetec Magbore KCD-1NA, but the lock handle faces an opposite direction.)
An example of usage
MTP-25A
MTP-13A
MTP-MT16
Parts for sale !
MTP-MT8
[mm]
Power Consumption
Dimensions Magnet Height ∅ 50x60x55 210 ∅ 116x75 360 ∅ 104x60 (440) 240
Tap Feeder
Applicable Tap Range
Max. Stroke
Magnet form
Holding Power
Power Source
Turning Angle
Back/Forth Movement
Order No. MTP-6A MTP-13A MTP-25A MTP-MT8 MTP-MT16
Magnet
Tapper
M3-M6 60 Permanent
-
-
Magnet 0.8kN (80 kgf)
-
Manual
M6-M12
-
-
M10-M24 85
6kN (600 kgf) Singlephase 100 VAC 3.5kN (350 kgf) 8kN (800 kgf)
30W
Electro Magnet
Motor M3-M8 100 M8-M16 140
34W 285W 360W
∅ 142x70 (390) 355 320°
30
※ The power cable included is 5 m long for MTP-25A and MTP-MT16 and 2 m long for MTP-MT8. ※ For Model MPT-MT, use a taper hand tap or plug hand tap. ※ MTP-MT16 requires tap holders suitable for tap sizes, which are optionally available. (See the figures below.) installed. ※ The fi gures in ( ) in “Height”are the height with the electric tapper ※ The holding power applies to SS400, 25 mm thick mill scale surface.
JSR Entech Catalogue 425 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook