Magnetie Tools
Pen Type Demagnitizer อุปกรณ์สลายแม่เหล็กขนาดเล็ก
Compact but improved demagnetizing performance!
KMDP-16A
Recommended where magnetism on the surface of metallic workpieces in general need to be reduced in a limited area or locally. This is useful to completely eliminate weak magnetism that remains locally in jigs and workpieces after they have been demagnetized by a largedemagnetizer. It is also suitable for demagnetizing cutters of machines and punches and guide pins of press dies while they are mounted. • A rare earth magnet having strong magnetic force is used at the end of the rotary magnetic field • Re-chargeable battery operation. Power can also be supplied by the included AC adapter. • Handy, maintenance free design with compact style and long life use. • Environment friendly nickel hydrogen rechargeable battery included.
[mm]
Order No. KMDP-16A
Battery
2.4V2000 mAh ※ AC adapter (input AC100V 50/60Hz, output DC2.7V 0.5A cord length 1.9m) is provided as standard accessory
Handy Type Demagnitizer อุปกรณ์สลายแม่เหล็กขนาดเล็ก
Suitable for demagnetizing tools such as drills, cutting tools, cutters and magnetized slide calipers. They can also be used for demagnetizing a part of large steel plates.
• Compact and handy.
• The demagnetizer is turned on while the pushbutton switch is held pressed and turned off when you release it. • The button must be pressed on during demagnetizing operation. • Turn it off when the demagnetizer is more than 100 mm away from the demagnetizing work. • Working rate : 70 % ED (power on for 7 minutes and pausing for 3 minutes).
KMDH-5A
[mm]
Top Plate Width Length Height
Demagnetizing Width
Order No. KMDH-5A
Power Source
Source Capacity Working Rate
Single-phase 100 VAC 50/60Hz
70VA
70% ED
50
86
102
119
※ The height is up to the grip. ※ 2m cord is provided. ※ A diff erent-voltage type (special type) is also available.
Pinpoint Type Demagnitizer เครื่องสลายแม่เหล็กแรงสูง
An alternating field is produced at the tip and bottom by an AC power source, which is brought into contact with a workpiece and then moved away. Then the magnetic flux density on the surface is reduced locally. This demagnetizer works effectively in demagnetizing molds and large materials partially. • Since this demagnetizer produces a strong magnetic field at the tip, it can effectively demagnetize places that are difficult to demagnetize with a conventional table type or handy type demagnetizer. • The magnetizing effect is powerful, but the attracting force is not strong. Thus, the tip part can be brought into contact with a small area for easy handling. • A thermo label is attached to the tip part, which warns a temperature rise due to frequent, repeated use. When the thermo label appears, stop using the demagnetizer until it goes out.
[mm]
Source Capacity
Order No. KMDH-P21
Power Source
Working Rate
Single-phase 100 VAC, 50/60 Hz
570/380VA 20% ED, 10 sec- onds max.
※ The power plug is of tracking resistance type.
JSR Entech Catalogue 433 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook