Testing Instrument
Durometer เครื่องวัดความแข็งยาง (ดูโรมิเตอร์)
Pocket Type
GS-719P GS-709P
Durometer of pocket type it is convenient to carry.
Type A Durometer Peak pointer type
Specifications Order No.
Spring Load Value 0-100
Indentor Shape (mm)
Indentor Height (mm)
Type
Application / Materials Conform Standards
General rubber (Medium hardness) Soft plastic, General rubber Ultra soft rubber
Type A Type A
JIS K 6253 550-8050mN (56.1-821.1gf) Truncated Cone of Ø 0.79 with 35° angle JIS K 7215 549-8061mN (55-822gf) ASTM D 2240 203-1111mN (20.7-113.3gf) Hemisphere of SR6.35
GS-719P GS-709P GS-755 GS-779G
2.50
Type OOO
Type A approximate Thin Sheet Hardness
−
388-1288mN (9-131gf)
Ø 0.35
1
Compliance With JIS K 7215 Standard Durometers For Hardness Test Of Plastic
GS-709N Type A Durometer General rubber Soft plastic
GS-709P Type A Durometer Peak pointer type Pocket type
GS-702N Type D Durometer Plastics Hard rubber
Specifications Order No.
Indentor Height (mm)
Indentor Shape (mm)
Type
Application / Materials
Conform Standards
Spring Load Value 0-100
Conical Cone of R0.1 with 30° angle Conical Cone of R0.1 with 30° angle Truncated Cone of Ø 0.79 with 35° angle Truncated Cone of Ø 0.79 with 35° angle Truncated Cone of Ø 0.79 with 35° angle Conical Cone of R0.1 with 30° angle
Type D
Plastics / Hard rubber Plastics / Hard rubber
0-44483mN (0-4536gf) 0-44483mN (0-4536gf) 549-8061mN (56-822.1gf) 549-8061mN (56-822.1gf)
2.50 2.50 2.50 2.50 2.50 2.50 2.50
GS-702N GS-702G GS-709N GS-709G GS-709P GSD-719J GSD-720K
Type D (Peak pointer type)
JIS K 7215 ISO 868 ASTM D 2240
Type A
Soft plastic / General rubber
Type A (Peak pointer type) Soft plastic / General rubber
Type A (Pocket type)
Soft plastic / General rubber
JIS K 7215
550-8050mN (56.1-821.1gf) Truncated Cone of Ø 0.79 with 35° angle
Type A Type D
Soft plastic / General rubber JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240 Plastics / Hard rubber
549-8061mN (56-822.1gf) 0-44450mN (0-4533gf)
Compliance With ASTM D 2240 Standard Durometers For Hardness Test Of Rubber Characteristic
GS-754G Type OO Durometer Very soft rubber
GS-750G Type B Durometer Medium-hand rubber
GS-755 Type OOO Durometer
Specifications Order No.
Indentor Height (mm)
Indentor Shape (mm)
Application / Materials Conform Standards Spring Load Value 0-100
Type
Conical Cone of R0.1 with 30° angle Truncated Cone of Ø 0.79 with 35° angle Hemisphere of SR 1.19 Hemisphere of SR 1.19 Hemisphere of SR 1.19 Hemisphere of SR 6.35 Conical Cone of R0.1 with 30° angle Truncated Cone of Ø 0.79 with 35° angle Hemisphere of SR 1.19 Hemisphere of SR 1.19
Type B (Peak Pointer type) Medium-hard rubber
2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50
550-8050mN (56.1-821.1gf)
GS-750G GS-751G GS-752G GS-753G GS-754G
Type C (Peak Pointer type)
Hard rubber
0-44450mN (0-4533gf) 0-44450mN (0-4533gf)
Type DO (Peak Pointer type) Medium-hard rubber
Type O (Peak Pointer type) Type OO (Peak Pointer type)
Soft rubber
550-8050mN (56.1-821.1gf) 203-1111mN (20.7-113.3gf) 203-1111mN (20.7-113.3gf) 550-8050mN (56.1-821.1gf)
Very soft rubber Very soft rubber
ASTM D 2240
Type OOO
GS-755
Type B Type C
Medium-hard rubber
GSD-750K GSD-751J GSD-752J GSD-753J GSD-754K
Hard rubber
0-44450mN (0-4533gf) 0-44450mN (0-4533gf)
Type DO
Medium-hard rubber
Type O
Soft rubber
550-8050mN (56.1-821.1gf) 203-1111mN (20.7-113.3gf)
JSR Entech Catalogue 493 jetco@jet.co.th Hemisphere of SR 1.19 2.50
Type OO
Very soft rubber
jet@jet.co.th
Powered by FlippingBook