Testing Instrument
Durometer เครื่องวัดความแข็งยาง (ดูโรมิเตอร์)
Compliance with JIS K 7312 Standard Thermosetting poly Urethane Estolamer Moldings Physical Test
GS-701N Type C (ASKER) Soft rubber for Windings yarn
Specifications
Application / Materials
Conform Standards Spring Load Value 0-100
Indentor Shape (mm)
Indentor Height (mm)
Type
Order No. GS-701N GS-701G GSD-701K
Type C
539-8385mN (55-855gf) Hemisphere of SR5.08 539-8385mN (55-855gf)) Hemisphere of SR5.08 539-8385mN (55-855gf) Hemisphere of SR5.08
2.54 2.54 2.54
Soft rubber, Foam rubber Eraser, Windings yarn
Analog
JIS K 7312 JIS S 6050
Type C (Peak pointer type)
Digital
Type C
Teclock Origina Standard Durometer
GS-744G Type FO
GS-743G Type E2 Durometer Soft rubber
Durometer Soft styrene foam
Specifications
Indentor Height (mm)
Application / Materials Soft rubber
Conform Standards
Indentor Shape (mm)
Type
Spring Load Value 0-100
Order No.
Type E2 (Peak Pointer type) Type FO (Peak Pointer type)
TECLOCK E2 550-4300mN (56.1-438.6gf) Hemisphere of SR2.50 2.50
GS-743G GS-744G GSD-743K GSD-744K
Analog
Soft styrene foam TECLOCK FO 550-4300mN (56.1-438.6gf) Cylindrical cone of Ø 25.2 2.50
Type E2 Type FO
Soft rubber
TECLOCK E2 550-4300mN (56.1-438.6gf) Hemisphere of SR2.50 2.50
Digital
Soft styrene foam TECLOCK FO 550-4300mN (56.1-438.6gf) Cylindrical cone of Ø 25.2 2.50
Compliance with JIS K6301 Standard Vulvanized Rubber Physical Test (Discontinue in 1998 August)
GS-703N
GS-706N JIS A (old type) General rubber
JIS C (old type) Hard rubber Ebonite
Specifications
Application/ Materials Hard rubber Hard rubber
Conform Standards Spring Load Value 0-100
Indentor Shape (mm)
Indentor Height (mm)
Type
Order No. GS-703N GS-703G GS-706N GS-706G GSD-706K
JIS C (old type) Type C (old type) Peak Pointer type JIS A (old type)
JIS K 6301 980-44100mN (100-4500gf) Truncated Cone of Ø 0.79 with 35° angle JIS K 6301 980-44100mN (100-4500gf) Truncated Cone of Ø 0.79 with 35° angle
2.54 2.54 2.54 2.54 2.54
Analog
Truncated Cone of Ø 0.79 with 35° angle Truncated Cone of Ø 0.79 with 35° angle Truncated Cone of Ø 0.79 with 35° angle
General rubber JIS K 6301 539-8385mN (55-855gf)
Type A (old type) Peak Pointer type General rubber JIS K 6301 539-8385mN (55-855gf) Type A (old type) General rubber JIS K 6301 539-8385mN (55-855gf)
Digital
Simplified Micro-Hardness Tester for Thin Sheet Hardness
GS-779G Peak pointer type
Specifications Order No.
Type
Spring Load Value 0-100 388-1288mN (9-131gf)
Indentor Shape (mm)
Indentor Height (mm)
Type A approximate
Ø 0.35
1
GS-779G
JSR Entech Catalogue 494
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook