Testing Instrument
Automatic type Durometer Stand เครื่องวัดดูโรมิเตอร์แบบออโตเมติก
Easy to speed control Compliant by JIS K 6253 and ISO 7619. Moving-down speed range is 1.0 mm/sec to 20 mm/sec, with 0.1mm/ sec in steps.
Stable measurement without individual variability Easy operation via touch panel display Durometers can be attached for GX-610II. Stable measurement without individual variability Constant speed and load provide stabile measurement.
* The durometer in the photo is not Included. * Some company's Durometer can not be used.
Weight for 5kg. *option=ZY-128
Weight for 1kg.
Specification of GX-610 II Order No.
*Included= ZY-089
GX-610II
Moving Speed Consumption Current
1.0 to 20.0 mm / sec (confirurable every 0.1 mm / sec)
1.0 (A) or less
W180 (not including SW protrusion) L276 (not including connect protrusion) X H400 (to the pole tip) (mm)
Dimentions
Body Weight Power Supply
11.4 (kg) / power supply 0.2 (kg)
• Type A/E Durometer need ZY-089 (1kg). • Type D need optional weight ZY-128 (5kg). • GSD series needs optional weight ZY-090 (1kg).
Input AC100-240 (V)
Display Brightness
8 levels
Specifications of weight Pressure Value Weigt Code-No.
Touch Sensitivity
Hi / Lo setting
Touch Sound
Enable / Not Enable
Applicable Durometer Model
Analog Digital
ZY-089 (Included) ZY-090 (Option) ZY-046 (Option)
VFD (Vacuum fluorescent display ) touch panel Calibrate certification is available
A , B , E , A (Old) , Type C (ASKER C) , O
1kg
4kg
D, ASTM C, DO, JIS C (Old type)
Manual Operation Type Durometer Stand With Speed Controller
• Speed controller with high reliability is adopted for moving down speed adjustment unit. • Alignment unit which realizes high contact between indenter (contact point) of durometer and test piece is mounted. • 65mm for analog and 40mm for digital are obtained for possible measuring range. • Shaft with square thread is adopted that can prevent holder falling down and moving up and down.
• 1kg can be measured by type A and type E durometer as they are. Measuring by type D needs optional weight ZY-046 for measuring 5kg. Digital durometer GSD series needs optional weight ZY-090 for measuring 1kg. • Calibration certificate of mass (with durometer) can be issued, which are prescribed in ISO / JIS.
Specifications Pressure Value
Weigt Code-No. ZY-089 (Accessory) ZY-090 (Option) ZY-128 (Option)
Applicable Durometer Model A , B , E , A (Old) , Type C (ASKER C) , O D, ASTM C, DO, JIS C (old type)
Analog Digital
1kg
4kg
GS-612 *ราคาไม่รวม Durometer
Weight
8.5kg
• Hardness can be measured by durometer with load prescribed by JIS by mounting durometer and manual operation. • Adopting cam has realized easy operation and cost performance. • Alignment unit which realizes high contact between indenter (contact point) of durometer and test piece is mounted. • 1kg can be measured by type A and type E durometer. as they are. Measuring by type D needs optional weight ZY-046 for measuring 5kg.. Digital durometer GSD series needs optional weight ZY-079 for measuring 1kg. Manual Operation Type Durometer Stand
• Calibration certificate can be issued (Operation speed certificate can not be issued.).
Specifications Pressure Value
Weigt Code-No.
Applicable Durometer Model
GS-615 *ราคาไม่รวม Durometer
Analog Digital
ZY-078 (Accessory) A, B, E, A (Old), Type C (ASKER C), O
1kg
ZY-079 (Option) ZY-128 (Option)
D, ASTM C, DO, JIS C (old type)
Weight
3.9kg
4kg
JSR Entech Catalogue 495 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook