Testing Instrument
Durometer เครื่องวัดความแข็งยาง (ดูโรมิเตอร์)
Durometer Measuring Stand for Durometer
Durometer is a testing machine. In case that it corresponds to “Monitoring Machine ” and “Measuring Machine” of ISO 9001 (JIS G 9001), controlling machines along with it is needed. Teclock is one of a few manufacturers of durometer which has obtained the authentication of ISO 9001 and can originally issue 3 kinds of traceability system diagram, calibration certificate and inspection report that are needed for calibration documents. In addition, Teclock can issue 3 kinds of documents for durometer tester and indentor height gauge, that are needed for internal inspection. Use these for control based on internal
calibration standard. Durometer Tester
This is inspection machine which simply checks spring load value of analog type durometer. Putting defined load with 3 pieces of standard weight to the inverted durometer and inspecting whether graduation of 25, 50 and 75 correctly point out. Calibration certificate can be issued. (Digital type durometer and other makes products can not be calibrated.) In addition, in the standard of overseas and also domestic, inspection method by using mechanism of even balance and with normal position of durometer is introduced.
GS-607
Specifications Order No.
Weight (kg)
Applicable Durometer Model
3.7 3.7 3.7 3.7
GS-701N/GS-701G/GS-706N/GS-706G
GS-607 GS-607A GS-607B GS-607C
GS-709N/GS-709G
GS-719N/GS-719G/GS-721N/GS-721G/GS-750G/GS-753G
GS-743G
Type D durometer for tester does not manufacture. Calibration certificate is possible.
Indentor Extension Gauge
ZY–120
Height of indenter (contact point) of durometer is simply checked. ZY-119 is for JIS K 6301 and ZY-120 is for JIS K 6253. Products of other makes can be checked.
ZY–119
Specifications Order No.
Indentor Height (mm)
50DEG 1.27mm 1.25mm
2DEG
Applicable Durometer GS-701N/G, 706N/G GS ∙ GSD-719, 720 Series
2.54 type 2.5 type
2.489mm 2.45mm
ZY-119 ZY-120
Calibration certificate is possible.
This is not rubber test piece. It is used for easy checking to find out failure of durometer. Measuring hardness when it is purchased and use it for daily control of durometer. Rubber Piece for Durometer Measuring
ZY-109
ZY-107
Specifications Order No.
Type
Dimension (mm)
Applicable Durometer
Durometer A Hardness:50 40×80×12 Thickness Durometer A Hardness:80 40×80×12 Thickness
ZY-107 ZY-108 ZY-109 ZY-110
ZY-108
TypeA (GS,GSD-719J Series)
ZY-110
Durometer D Hardness:40 70×80×7 Thickness TypeD (GS,GSD-720J Series)
Durometer E Hardness:80 40×80×12 Thickness TypeE (GS,GSD-721J Series) *Durometers complying with these test pieces are Type A, Type D, Type E, which are compliant with JIS K 6253. *Calibration Certificate about test pieces can not be issued.
Alignment Unit for Durometer Stand
Alignment unit
As it can move front / back and left /right it is the new function which has materialized highadhesion between pressurized face of durometer and face to be measured of test piece. Itis mounted to GS-610, Gs-612, GS-615 and GX-01. Unmovable type is also available. Ask our branch nearby for details.
JSR Entech Catalogue 496
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook