JSR ENTECH Catalog

Testing Instrument

Hardness Tester File Type ตะไบตรวจสอบความแข็ง

Standard Table

Order No.

1. Start with the BLACK handle file (65 HRC) and run thefile over the test material. If it marks the material, the material is less than 65 HRC. 2. Try the BLUE handle (60 HRC) : If it does not mark the material, the file is softer than the material. In this casethe material is between 60 HRC. and 65 HRC. 3. If the BLUE handle (60 HRC) did mark the material, simply try the GREEN file (55 HRC), LIGHT-GREEN handle file (50 HRC), and continue until the material is not marked. The approximate hardness of the material is between the file that marks the material and the file that slips over the material. • This new innovative file set provides a quick, inexpensive and simple way to check material hardness. No need to bring the material to be tested over to a hardness testing machine : Just bring this file set (6 files from 40 to 65 HRC) to the piece to be tested. Follow these simple steps to test your material :

Analog Viscoumeter เครื่องวัดความหนืด

Digital Viscoumeter เครื่องวัดความหนืดดิจิตอล

• Testing conditions can be easily set from the touch panel. • By using Rheocalc T software (optional), measurement and analysing, such as, flow curve, temperature dependency and hardening process can be per- formed.

LVT

LVDV2T

• Viscometer as international standard. • Analog viscometer where viscosity is manually calculat- ed by using the factor finder. • It is possible to summarily measure viscosity.

• Standard spindles (4 pcs for LV) (6 pcs for RV, HA, HB) • Stand • Guard (LV and RV only) • Temperature sensor • Power Cable • Carrying case • Attached software • The software attached to the product enables to transfer programs, for example, that regarding RPM, from PC to viscometer. • Variable rotational speed ranging from 0.1 to 200rpm makes it possible to collect data thoroughly.

• 6 Pieces Standard Spindles (RV, HA, HB), 4 Pieces Standard Spindles (LV) • Stand • Factor finder • Power Cable • Carrying case

Measured Viscosity Range (cP/mPa, s)

Rotation Speed (rpm)

No. of speed stages

Power (V)

SPQ (piece)

Power (V)

SPQ (piece)

Order No.

15 to 2M 0.3 to 60 AC115 100 to 8M 0.5 to 100 AC115 200 to 16M 0.5 to 100 AC115 800 to 64M 0.5 to 100 AC115

1 1 1 1

LVT HAT HAT

15 to 6M 0.1 to 200 290 AC90 to 260 100 to 40M 0.1 to 200 290 AC90 to 260 200 to 80M 0.1 to 200 290 AC90 to 260 800 to 320M 0.1 to 200 290 AC90 to 260

1 1 1 1

LVDV2T RVDV2T HADV2T HBDV2T

JSR Entech Catalogue 502 HBT

jet@jet.co.th

jetco@jet.co.th