Testing Instrument
Wireless Communication TW-800 Series Model
TW-800 series are wireless products for Pokayoke (tools using) at a production process.
Transmitter TW-800T TW-800T is a transmitter used fixing to a torque wrench,pliers wrench, check pen and so on. • You can look see the communication OK/NG by LED lighting and flashing. • TW-800T uses CR2032 type of battery.Battery life is about 300,000 shots. • TW-800T has the function of remaining battery level notice and communication check by using test switch. • It is used polypropylene material for protecting broken the case.
Receiver TW-800R TW-800R is a receiver of 1 point relay output type. • TW-800R is used by AC100-240V by using AC/DC adaptor of an option.
• The diversity antenna which realizes stable communication is a standard. • The diversity antenna which realizes stable communication is a standard. • TW-800R is small and light.Weight is 250g, Dimension is 10cm x 8cm x 3cm.
OPTION Protect Cover
Receiver with a extension unit of serial output TW-800R-EXS TW-800R-EXS is a receiver having an interface of RS-232C. TW-800R-EXS can receive signals from transmitters. The number of transmitters does not have restriction.
For small size wrench[TW-510C-1] For middle and big size wrench [TW-510C-2]
Ref) We recommend to use TW-510C-1 for small wrenches to the wrench not more than 50N.
Receiver with a extension unit of 3 relay output TW-800R-EXP TW-800R-EXP can receive signals from 4 transmitter by connecting an extension unit of 3 relay output. And TW-800R-EXP can output respectively.
[RS-232C Communication Protocol] RS-232C data flow out by using original communication format. Baud rate 19200/38400 Parity none Data length 8bit Stop bit 1bit Flow control RTS-CTS/none
RS-232C output format Preamble STX Transmitter ID number
*We don't sell a body of torque wrench.
Tightening information Test SW, Battery information
ETX Check sum
*We can make LAN type. Please contact us.
[Specification] Order No.
TW-800T
TW-800R
TW-800R-EXP
TW-800R-EXS
Frequency
2,403MHz-2,478MHz(An unassigned channel is automatically chosen by a frequency hopping function.)
Communication
2 way communication 250kbps
Limit switch 1point, Test switch 1point
Input
--------------
Contact output* 1point Terminal block:M3 (2P) Rated load voltage AC/DC30V per point Rated load current 0.5A per point LED for receiving(Green) * 1point (Combination lighting switch for pairing) Power LED(Red) * 1point -
Contact output*4point Terminal block:M3(2P) Rated load voltage AC/DC30V per point Rated load current 0.5A per point LED for receiving(Green) * 1point (Combination lighting switch for pairing) Power LED(Red) * 1point
Contact output* 1point Terminal block:M3(2P) Rated load voltage AC/DC30V per point Rated load current 0.5A per point LED for receiving(Green) * 1point (Combination lighting switch for pairing) Power LED(Red) * 1point Communication monitor LED * 5point RS-232C*1
Output
-----------------
Interface
Display
LED 1 point(Red/Green)
Buzzer Power
Electrical buzzer 95dB/m
Coin Battery(CR2032)
DC24V+-20%(DC19-28V)(Terminal block:M3)
Under 90mA(At receiving standby under 50mA)
Consumption current
-
Under 60mA
Under 80mA
Operation temperature range Temperature 0-50 degree Humidity Under 80% Dimension
34W*71D*17.5Hmm (Except projection)
80W*100D*28Hmm (Except projection)
130W*100D*28Hmm (Except projection)
Weight Antenna
Approx40g PCB antenna 300,000 Shots
Approx250g
Approx430g
Approx450g
Dipole antenna(Diversity type)
Battery life
-
JSR Entech Catalogue 549 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook