Testing Instrument
Torque Gauges SGK Model
Capable of accurately measuring very low torque values.
• Due to their miniature design and light weight, these gauges are convenient and easy to carry. • A three part chuch with knurled surface enables firmly gripping even odd shapes. • The inset scale face helps avoid incidental damage. • The gauges measure clockwise and counterclockwise. • With scales on the sides and the face, torque readings can be obtained either way. • Accuracy :±3% of the indicated value over the full range
Using an SGK Gauge
Starting torque can be measured with the chuch gripping a knob or shaft of an electronic device. Rotate clockwise or couterclockwise. (Rotate CW or CCW)
Dimensions (mm)
Range (cw/ccw)
Range (cw/ccw)
Total length mm
Increment
Increment Chucking dia.
Order No. (gf•cm/kgf•cm) 90 (I) SGK-G 150 (I) SGK-G 300 (I) SGK-G 600 (I) SGK-G 1200 (I) SGK-G 2400 (I) SGK-G 1.5(II)SGK-G 2.4 (II) SGK-G 3.6 (II) SGK-G 6 (II) SGK-G 9 (II) SGK-G 15 (II) SGK-G
Order No. (mN•m/cN•m)
Order No. (mN•m/cN•m)
Grip dia
Total length (without bit)
gf•cm/kgf•cm
mN•m/cN•m Ømm
ØD1 L1
L2
N90 (I) SGK-G MN9SGK-G N150 (I) SGK-G MN15SGK-G N300 (I) SGK-G MN30SGK-G N600 (I) SGK-G MN60SGK-G N1.5 (II) SGK-G CN15SGK-G N2.4 (II) SGK-G CN24SGK-G N3.6 (II) SGK-G CN36SGK-G N6 (II) SGK-G CN60SGK-G N9 (II) SGK-G CN90SGK-G N15 (II) SGK-G CN150SGK-G
10~90 gf•cm
2 gf•cm
1~9 mN•m 0.2 mN•m
20~150 " 40~300 " 50~600 "
2 " 5 "
2~15 " 4~30 " 5~60 "
0.2 " 0.5 "
1-6.5 106 43
81
57.5
10 " 20 " 50 "
1 " 2 " 5 "
N1200 (I) SGK-G MN120SGK-G 10~120 " N2400 (I) SGK-G MN240SGK-G 20~240 "
100~1200 " 20~2400 "
0.1~1.5 kgf•cm 0.02 kgf•cm
1~5 cN•m 0.2 cN•m
0.2~2.4 " 0.4~3.6 " 0.5~6 "
0.02 " 0.05 " 0.1 " 0.2 " 0.2 "
2~24 " 4~36 " 5~60 " 10~90 " 10~150 "
0.2 " 0.5 "
1-8.5 134
63
100
73
1 " 2 " 2 "
1~9 " 1~15 "
Digital Torque Analyzers เครื่องทดสอบแรงขันประแจปอนด์แบบดิจิตอล
KDTA-SV Model
Enhanced digital processor system. Provides high performance with digital wrenches.
• LCD display eliminates reading errors. • Processor chip assures measurement with high reliability and accuracy. • The display unit angle can be adjusted approximately 70° • Saves time and helps speed up work. • Equipped with a kgficm/N-m selector switch. • Operator can set min/max percentage parameters from 0-10%. • Analyzer can indicate in or out of specification with pass or fail displayed. • Power source : AC100-240V 50/60Hz • Accuracy : ±1% of the indicated value +1 increment, over the full range • Display : LCD (character height : 25mm) • Operaling temperature : 5~35°C
Range (CW/CCW) Increment
Dimensions (mm)
Drive size Weight
kgf • cm / kgf • m
Included Accessory
Order No.
Overall depth
Overall width
Overall height
N • m
mm
kg
2~20 kgf • cm 0.01 kgf • cm 20~200 cN • m 0.1 cN • m 10~100 kgf • cm 0.1 kgf • cm 1~10 N • m 0.01 N • m 20~200 kgf • cm 0.1 kgf • cm 2~20 N • m 0.01 N • m 100~1000 kgf • cm 1 kg • cm 10~100 N • m 0.1 N • m 200~2000 kgf • cm 1 kgf • cm 20~200 N • m 0.1 N • m 600~6000 kgf • cm 1 kgf • cm 60~600 N • m 0.1 N • m 10~100 kgf • m 0.1 kgf • m 100~1000 N • m 1 N • m
KDTA-N2GT-UC
6.35×12 9.5×12 Socket
120 250 251
12
6
KDTA-N10GT-UC
KDTA-N20GT-UC
KDTA-N100GT-UC
9.5×14 12.7×14 Socket
180 320 284
14
15
KDTA-N200GT-UC
19.05x26 12.7x26 Socket 19.05x30 25.4x30 Socket
26
KDTA-N600GT-UC
220 380 272
25
30
KDTA-N1000GT-UC
JSR Entech Catalogue 553 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook