Testing Instrument
Driver Torque Meter I-8/I-80 เครื่องตรวจสอบแรงไขควงทอร์คไฟฟ้า
Measure torque (rotating force) for motor screw driver and torque driver. It is suitable for daily torque maintenance with simple operations. The data output (serial communication) is possible.
How to check torque
■ Specification for Driver adapter OW-025 OW-10
It enables to save peak value, output to PC (the optional PC is required) and others Step 4. The measurement finishes.
OW-20
OW-60
Range Max. 6.0N-m Mechanical life 10,000 times 8,000 times 5,000 times 5,000 times Bit joint part M2.6+Pan head screw M3.0+Pan head screw M4.0+Pan head screw M6.0+Pan head screw Body dimension Ø28×44 Ø32×51 Ø32×51 Ø 32×69 * In the bit joint part, the user inserts their using screw. * The adapters cannot be used for a manual torque driver. The optional driver adapter is required. Please contact us if you need. Max. 0.25N-m Max. 1.0N-m Max. 2.0N-m
Step1. Set the driver adapter.
Step 2. Turn on the power
Step 3. Operate the driver tool.(*)
*At the Step 3, the user inserts the using screw in the driver adapter.
■ Specification
Order No.
I - 8
I - 80
0.20~80.00 cN-m 0.020~8.000 kgf-cm 0.020~7.000 lbf-in
0.020~8.000 N-m 0.20~80.00 kgf-cm 0.20~70.00 lbf-in 2.0~800.0 cN-m
Measuring range*1
Accuracy Display
+/- 0.5% (reading value) or +/-3digit in less than 499 digit.
4 digits LCD display CW-CCW (Right turn /Left turn)
Measuring direction Measuring mode Upper/Lower value setting Pass-fail decision Max./ Min./Ave. display Real time data output Internal memory
P-P(Peak-hold), T-R(Track), P-D(Peak-down),C(real time data output) Upper/ Lower value are able to be set in the measuring range. Display stored Max. / Min. /Ave. / Number of measuring values. Output applied torque approx. 1/180 sec each.
Pass/Fail can be check in the measuring range.(P-P mode) GOOD (Pass)…Green lights, NG( Fail)…Red blinks
800 data
Output data
ASCII (baud rate 19200 bps)
Automatic clear value function in each 0.1~3.0 sec (The setting is possible from 0.5 sec each). Manual zero reset setting is at 0.0 sec.
Auto zero reset function
Zero Reset function
Auto or Manual (only pressing the button.)
Battery
Ni-MH 300 times
Auto power-off
Auto power-off in 10 minutes with no operation. Approx.3 hours/ Approx. 12 hours continuous use after full charge.
Charging time/ Usable time
Socket joint part (Detecting parts shape) Square 20 mm / Square 9.5 mm
Driver adapter OW-025/OW-10
Driver adapter OW-20/OW-60
Attaché case, battery charger, inspection certificate (*2), calibration certification (*2), traceability system diagram(*2).
Included items (1 each)
Torque Tester เครื่องตรวจสอบแรงทอร์คบ๊อคลมไฟฟ้า
• Measures impact torque of the impact tool. • Integrated impact counter measures impact movement. • Battery driven, Can be used anywhere. • Both CW and CCW rotations are measurable. • Hard and Soft Joints are added. • With USB data output. • With calibration certificate, inspection result document, and traceability system chart. (charge free)
DI-4B-25
• Startup check of impact tools.
Order Unit : 1 Piece Factory direct | Shipping not included | Order No. Measuring
Min measuring range (N•m)
Outer Dimension (mm)
SPQ (piece)
range (N•m)
• Torque accuracy: ±0.5% • Power supply: Ni-Cd battery (accessory)
0.30 to 25
0.01
150 x 220 x 74 1
DI-4B-25
JSR Entech Catalogue 557 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook