Drills Tools
JE/JF Series Tools for Processing Tungsten Carbides and Die Steels เครื่องมือตัดชนิดพิเศษสำ �หรับคาร์ไบด์กับงานแม่พิมพ์ที่ต้องการความละเอียดสูง
Diesack Super Finish Tungsten carbides
Processing example
Die steels
Processing example
Tools for mirror finishing for tungsten carbides and die steels.
Square-type JE series
Using the tool edge allows for mirror finishing of a wide range of flat surfaces. ※ Combined use with Diesack finish is recom- mended to reduce processing time.
Ball-type JF series
Mirror finishing for spherical, non-spherical and other threedimensional shapes. ※ Combined use with Diesack finish is recommended to reduce process- ing time.
• Processing conditions Diameter of tool : R1.0 (Ø2.0) Revolution speed : 20000min -1 Feed : 500mm/min Step : 0.001 ~ 0.002mm Machine : Machining center Work material : Tungsten carbide
Dimensions
For tungsten carbide / die steel Order No. Product name ØD Diameter JED-1.0 Ø1.0 for mirror finishing 1.0 JED-1.5 Ø1.5 for mirror finishing 1.5 JED-2.0 Ø2.0 for mirror finishing 2.0 JED-3.0 Ø3.0 for mirror finishing 3.0 JED-4.0 Ø4.0 for mirror finishing 4.0 JED-5.0 Ø5.0 for mirror finishing 5.0 • Processing conditions Diameter of tool Ø5 Revolution speed : 12000 min-1 Feed : 200mm/min Step : 0.010 -0.002mm Machine : Machining center Work material: Tungsten carbide
Dimensions
L2 Length beneath head
ØY Shank diameter
L Body length
L1 Blade length
For tungsten carbide / die steel Order No. Product name JFD-0.5 R0.5 for mirror finishing 0.5 ØD Diameter
L2 Length beneath head
ØY Shank diameter
L Body length
L1 Blade length
0.5 0.5 0.5 0.5 0.5 0.5
3 4 5 6 8
4.0 4.0 4.0 6.0 6.0 6.0
50 50 50 60 60 60
1.5
3 4 5 6
4.0 4.0 4.0 6.0
50 50 50 60
JFD-0.75 R0.75 for mirror finishing 0.75 1.5
JFD-1.0 R1.0 for mirror finishing 1.0 JFD-1.5 R1.5 for mirror finishing 1.5
1.5 1.5
10
JK Series PCD wear-resisxtant Tool ปั่นจี๋เคลือบหัวเพชร
Polycrystalline diamonds and diamond coating provides wear-resistance 50 to 100 times greater than that with conventional tungsten carbide lathe centers.
PCD Lathe center / DP Lathe center JK/JQ series Order No. Taper Tip Ød1 ØD1 ØD L1 L2 L
A Ød2
MT1 PCD 3 12.2 12.065 25 57 82 3.5 MT1 MT2 PCD 5 18.0 17.780 31 69 100 MT2 MT2
JK-1 JK-2
※ Can provide MT other than those above.
The wear - resistance of PCD (polycrystalline diamonds) allows for tool life much longer compared to conventional tungsten carbide tools JL Series PCD Blades for centerless grinder JL series แท่นวางชิ้นงานเจียรแบบเพชร
PCD Blades for centerless grinder JL series Diamond width Diamond section length
Parallelism 5μm/100mm
1mm ~ 10mm
~ 300mm
JSR Entech Catalogue 572 ※ Can provide MT other than those above.
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook