Abrasive Tools
Ceramic Fiber Stones Ceramic Fiber Stones Cristone ® The Crystal Fiber Stones
CERATON is made from ceramic fibers bonded in thermosetting resin, exhibles superior strength compared by normal abrasive stones. Long life and no clogging is suitable for all kinds of equipments like ultrasonic machines, high speed rotaries, Air Lappers & Air Grinders and also good by hand polishing. Recommendation Grit Size Applications #180, #250, #280 To remove the rough machining surface or hard EDM scale of tool and die steels. #360, #400, #500 General lapping of finer surface line of tool & die steels. #700, #1000, #1200 Fine polishing & finishing Ø3.0mm It can be used like grinding point (max.length 50mm), or by sharpening it for detail lapping In order to reach the best performance, we recommend that the stone should be hold up-right making an angle of approx. 30°-40° to the work piece.
SIZE T x W (ØD) mm
Brown # 180
Orange # 250
Black # 280
Navy Blue # 360
Blue # 400
1 x 4 1 x 6
CSBr-1004100 CSOr-1004100 CSBL-1004100 CSN-1004100 CSB-1004100 CSBr-1006100 CSOr-1006100 CSBL-1006100 CSN-1006100 CSB-1006100 CSBr-1010100 CSOr-1010100 CSBL-1010100 CSN-1010100 CSB-1010100
1 x 10
Ø 3
CGBr-30100
CGOr-30100 CGBL-30100 CGN-30100
CGB-30100
※ Lengths of 150 are available. SIZE T x W (ØD) mm Green # 500
Yellow # 700
Pink # 1000
Red # 1200
1 x 4 1 x 6
CSG-1004100 CSG-1006100 CSG-1010100 CGG-30100
CSY-1004100 CSY-1006100 CSY-1010100 CGY-30100
CSP-1004100 CSP-1006100 CSP-1010100 CGP-30100
CSR-1004100 CSR-1006100 CSR-1010100 CGR-30100
1 x 10
Ø 3
※ Lengths of 150 are available.
JSR Entech Catalogue 677 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook