Measuring Tools
Digital Indicator ID-C - Calculation Type ไดอัลเกจดิจิตอล
• Calculation function operates on spindle displacement. • Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating any need for the con- version tables previously needed for those applications where fixtures are typically used. • Peak-Value Run-out/MAX/MIN Hold enables GO/±NG judgement for peak value. • Bezel diameter : Ø 59.4mm
543-342B
Specifications Metric Order No.
Battery life (normal use)* 2
Range Resolution (selectable) Accuracy* 1 Hysteresis* 1 Repeatability* 1 Measuring Force Power supply
12.7mm 25.4mm 50.8mm
1.5N or less 1.8N or less* 3 2.3N or less* 3
543-340B 543-590B 543-595B
0.003mm 0.002 mm 0.002 mm
12 steps
CR2032 x 1 pc Approx. 1 year
0.006mm
Inch/Metric
Resolution (selectable)
Range
Accuracy* 1
Hysteresis* 1 Repeatability* 1 Measuring Force Power supply Battery life (normal use)* 2
Order No. 543-341B 543-591B 543-596B
1.5N or less 1.8N or less* 3 2.3N or less* 3
.5"/12.7mm ±.00010"/ 0.003 mm
.00010"/ 0.002 mm
00010"/ 0.002 mm
1”/25.4mm
CR2032 x 1 pc Approx. 1 year
12 steps
2”/50.8mm ±.00025"/ 0.006 mm
Digital Indicator ID-C Signal Output Type ไดอัลเกจดิจิตอล • Enables a tolerance judgment to be output to external equipment for a measurement result against user-defined limits. Solid-state switching provides high reliability by avoiding metallic switch contacts. • A peak-detection function is equipped for measuring and judging peak values, such as runout. • Provided with a 4m cable. • External power required is 5 - 24VDC. • Bezel diameter : Ø 59.4mm
543-350
Specifications Metric
I/O Specifications
Wire Black
Signal
I/O
Description
– V (GND)
— Connected to minus (-) terminal
Range Resolution Accuracy* 2
Measuring Force
Order No. (w/ lug, flat-back)
Red
+ V
Power supply (5 - 24VDC)
12.7mm 0.001/0.01 0.003 mm or less 2.5N or less
543-350
543-350B
Orange Green Brown
– NG
O Tolerance judgment result output: Only the terminal corresponding to a judgment result is set to the low level. O
OK
Inch/Metric
+ NG O Yellow PRESET_RECALL ZERO I External input terminal: If the relevant terminal is set to the low level, its signal becomes true. Blue PEAK_START I Shield FG Connected to GND (Earth) Note : Measurement data cannot be output.
Measuring Force
Order No. (w/ lug, flat-back)
Range
Resolution
Accuracy* 2
±00010"/ 0.003mm or less 2.5N or less
543-351 543-351B .5"/12.7mm .00005”/.0001mm .0005”//0.001mm/0.01mm
Digital Indicator ID-U Slim and Economical Design ไดอัลเกจดิจิตอล • General purpose indicator with the measuring range of 25.4mm/ 1”. • Cost-effective and user-friendly type which is equipped with the basic functions necessary.
Specifications Metric Order No.
Range
Resolution
Accuracy* Measuring Force
(w/ lug, flat-back)
575-121
0.01mm
25.4mm 0.02mm 1.8N or less
—
575-121
Inch/Metric
Measuring Force
Order No. (w / lug, flat-back)
Range
Resolution
Accuracy*
1"/25.4mm .0005”/0.01mm ±0010"/0.02mm 2.5N or less
JSR Entech Catalogue 76 — 575-122
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook