Machine Tools
Collet Chuck (Long Type)
Thru-the-tool Coolant Available
Thru-the-groove Coolant Available
SBT50 - No. - CTMD MAX - L
F
ØD Gripping Range L L1 ØC1 ØC2
Collet Size
Adjust Screw
Order No.
G
MIN.
MAX.
225 150 255 180 285 190 225 150 255 180 285 190 225 150 255 180 285 190
-CTM10 -225
OH-M10
0.5 ~ 10
32
32 M10 x 1.5 30
60
CR10-
-255 -285 -255 -285 -255 -285
-CTM13 -225
0.5 ~ 13
36
36 M12 x 1.5 35
70
CR13-
OM-M12
SBT50
-CTM16 -225
1 ~ 16
44
42 M18 x 1.5 40
65
CR16-
OM-M18
NOTE : 1. The above-mentioned maximum speed will vary depending rigidity of the machine and balance of cutter. An adequate cutting condition should be selected for each case.
Slim Chuck
• Nut of conventional product (CTM Series) made slim • Interference between workpiece and jig reduced • Higher workability • Conventional collet (CR collet) usable as it is
SBT No. - CTSD - LG
Order No.
ØD
L
ØC1
G
Collet
60 90
-CTS07 -060G
-090G -120G -135G -090G -120G -135G -090G -120G -135G -090G -120G -135G -135G -165G -195G -135G -165G -195G -135G -165G -195G
0.5~7
16
M6 x 1
CR07 - (D)
120 135
SBT30
60 90
-CTS10 -060G
0.5~10
22
M8 x 0.75
CR10 - (D)
120 135
60 90
-CTS07 -060G
0.5~7
16
M6 x 1
CR07 - (D)
120 135
SBT40
60 90
-CTS10 -060G
0.5~10
22
M8 x 0.75
CR10 - (D)
120 135 105 135 165 195 105 135 165 195 105 135 165 195
-CTS07 -105G
0.5~7
16
M6 x 1
CR07 - (D)
-CTS10 -105G
0.5~10
22
M8 x 0.75
CR10 - (D)
SBT50
-CTS13 -105G
0.5~13
28
M10 x 1.5
CR13 - (D)
NOTE : 1. Collet, adjusting screw and chuck wrench are not included.
2. Contents described may be changed for improvement without prior notice 3. BT two-face restrained shank can be manufactured upon request.
JSR Entech Catalogue 815 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook