Machine Tools
Tool Presetter
• When ordering, please inform code no.and pull-stud no.
Taper Reduction Pot
Order No.
Code 80081 80082 80083 80084 80085 80086
Ext.Taper
Int.Taper
NT40 NT40 NT50 NT50 NT50 NT50
— — — — — —
NT30 NT35 NT30 NT35 NT40 NT45
T4030 T4035 T5030 T5035 T5040 T5045
By using Taper Reduction Pots, a single presetter can serve all of your setting needs. The pull-stud is built in,so measurement can be done with tension on the pull-stud. ※ A-pull-adapter is available which allows both regular and ANSI types to be used. ※ Taper reduction pots for NT50-HSK (32~100) and NT50-KM (32~100) and NT50-KM (32~80) are also available.
Test Bar Order No.
Code 80091
Taper
ØD
L
NT30 NT35 NT40 NT45 NT50 NT40 NT50 NT50
— Ø30 — Ø40 — Ø40 — Ø40 — Ø40 — Ø40 — Ø50 — Ø50
— 150mm — 150mm — 150mm — 150mm — 150mm — 250mm — 250mm — 300mm
G30 G35 G40 G45 G50
80092
80094 80093 80095 80096
G425 G525 G530
A 150mm length test bar is included as standard, and 250 and 300mmtest bars also available. ※ 250mm length test bars for HSK and KM are also available.
Specifications
STP-300S (Simple Type)
STP-300N (Standrd type)
STP-400 (Quality Type)
STP-500 (HI-Quality Type)
Order No.
80070
80074
80076
80078
X
0~Ø300
0~Ø300
0~Ø400
0~Ø500, 0~Ø800
X-axis Z-axis X-axis Z-axis X-axis Z-axis X-axis
Measurement Range
Z
30~430 (op.630)
50~500 (op.650)
50~500 (op.650)
50~650
X
0.02 (dia)
0.002 (dia)
0.002 (dia)
0.002 (dia)
Digital Display Unit
Z
0.01 0.01 0.01
0.005 (0.001)
0.005 (0.001)
0.005 (0.001)
X
0.001
0.001
0.001
Dial Gauge Reading
Z
0.01 (op.0.001)
0.01 (op.0.001)
0.01 (op.0.001)
X
Special screw Special screw Manual (Using handle)
Ball screw Ball screw
Ball screw Ball screw
Ball screw Ball screw
Feed Mechanism
Z
Z-axis Operation Method (X-axis & Z-axis)
Manual (Using handle)
Electric (2 levels) Manual (Fine Adjustment)
Electric (2 levels) Plus handle (Fine Adjustment)
Motor Type (X-axis & Z-axis)
—
—
Induction motor Ø120 (op. Ø180)
AC servo motor
Screen Dia. Magnification
Ø80 (op. Ø180) ×10 (op. ×20)
Ø180
Optical Projector
—
×10 (op. ×20)
×20
BT30,40,50 HSK32,40,50,63,80,100 KM32,40,50,63,80 Manual (Using handle)
BT30,35,40,45,50 (op. Ceramic Spindle) HSK32,40,50,63,80,100 KM32,40,50,63,80 (op. Tool height adjustment machanism type) (op. Double spindle type TP-300N only)
Spindle Shank (To be selected)
Auto Tool Locking Tool Clamping Force
0.4~0.7MPa (4~7kgf/cm2) Air pressure (op. Hydraulic type)
—
450 (Air pressure 0.5MPa)
1200 (Hydraulic type)
AC100V 10% 50/60Hz Please advise when ordering if another voltage is required. (Optional)
Power Supply
—
AC200V 10% 50/60Hz
External Dimensions
768×450×1520
933×646×1721
946×583×1740
1309×706×2140
Weight
70
350
400
700
Battery for Digimatic scale unit Light source lanmp Master gauge L150, Taper cleaner, Wrench set, Cover set, Spanner, Pedestal, Manual, Accuracy Table
Standard accessories
JSR Entech Catalogue 831 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook