Machine Tools
Nogacool แขนสำ �หรับฉีดนํ้ายาหล่อเย็น
NOGACOOL consists of a manifold & Loc-Line® flexible hose with a nozzle on top and a valve at the bottom, assembled on the power - ful on/off Popeye magnet. The plug attached can be replaced by a second Loc-Line ® hose. NOGACOOL is supplied with a set of three nozzles : 1/16”, 1/8”, 1/4”. Working conditions are as follows : Pressure : 2-3.4 Bar (30-50 Psi) Flow rate : 940 l/hour (250 gal/hour) Max. working Temp. 170°C. Also available with magnet and manifold only (order no. MC0161).
Spare parts
Order No.
320N Popeye magnet. Top thread M5
NF0037
Manifold
MC0156
324 mm flexible Loc-Line® hose. Other dimensions available upon request.
MC0320
Ø1.6 mm plastic nozzle (1/16”)
MC0066
MC1601
Ø3.2 mm plastic nozzle (1/8”)
MC0063
MC0161
Ø6.3 mm plastic nozzle (1/4”)
MC0067
Wide plastic nozzle, 16 holes Ø1 mm
MC0072
Wide plastic nozzle, 16 holes Ø1.5 mm
MC0073
Minicool สายอ่อนสำ �หรับฉีดนํ้ายาหล่อเย็น
Spare parts
Order No.
Control valve with Popeye magnet
MC0130
Spray unit 270 mm, Spray unit 340 mm,
MC0101 MC0102 MC0103 MC0380 MC0302 MC0360 MC0311
Spray unit 485 mm
Air line 1 m,
Air line 2 m
Suction line 1 m,
Suction line 2 m
NOGA MINICOOL is using the VENTURI principle to spray an air + liquid mixture. It consists of the following basic elements : A control valve, spray unit, air line, syphon line and a powerful on/ off Popeye magnet, which has a “V” form base, making it possible to mount on non-flat surfaces. The MINICOOL enables the user to easily control both the air flow rate and liquid rate. Stainless steel armoured syphon hose and air hose are made in standard lengths: 1m, 2m, 3m (special lengths available upon request). The spray unit comes in three standard lengths : 264, 334, 479 mm (special lengths available upon request).
Filter
MC3637
Washer
MC0030
Nuzzle nut
MC0001
Banjo screw + washer
MC0232
Banjo fitting
MC0031
JSR Entech Catalogue 863 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook