Spray Gun
Hand Spray Guns ปืนพ่นสีชนิดกากลาง
F200 SERIES
Economic center cup hand spray gun. Gun body is based on pre-model F200.Suitable for rough finishing. Stainless steel passage for waterborne compatiblity. * Paint cup should be ordered separately. *ราคายังไม่รวมกระป๋อง
F200-G with 6CP paint cup
Paint spraying volume mL/min
Maximum effective pattern width mm
Spraying pressure
Spraying distance mm
Air con sumption L/min
Nozzle bore mm
Paint feed system
Standard air cap
Pattern shape
Connection inlet
Standard paint cup
Order No.
MPa (PSI) 0.35 (50)
1.5 15U 2.0 20U 2.5 25U
370 400 410
250 340 385
260 385 310
F200-G15U* F200-G20U* F200-G25U*
for air :
G1/4 G3/8
Gravity
250
Tulip
6 CP
for paint :
• Paint viscosity should be 22 seconds for lacquer enamel using a Meiji model V-1 viscosity cup. *รุ่นอักษรสีเขียวเป็นสินค้าราคาพิเศษจำ�นวนจำ�กัด
1MPa = 145.04 Psi
Hand Spray Guns ปืนพ่นสีชนิดกากลาง
F410 Series
Beautiful finishing in thin and uniform paint film with wider spraying pattern. Reduction of spraying air pressure. Only O.25MPa. Well balanced body. Weight only 415g. Ergonomic with curved grip. Reduction of trigger load with lower resistance packing. Beautiful gun body with chrome plating brings long lasting and easy cleaning. Wide range model realizes almost any required spraying. Stainless steel passage for waterborne compatibility. CE and Atex certification are approved. High performance Well-balanced Beautiful finishing
F410-G with 6CP paint cup
* Paint cup should be ordered separately. *ราคายังไม่รวมกระป๋อง
Paint spraying volume mL/min
Maximum effective pattern width mm
Spraying pressure
Spraying distance mm
Air consumption L/min
Nozzle bore mm
Paint feed system
Standard air cap
Pattern shape
Connection inlet
Standard paint cup
Order No.
MPa (PSI)
1.0 1.2 1.3 1.4 1.5 1.8 2.0 2.5 1.0 1.2 1.3 1.4 1.5
10EV 12EV 13EV 14EV 15EV 18EV 20EV 25EV
255 255 260 270 280 285 290 335 295 295 305 305 305
140 185 195 205 220 270 275 350 140 185 200 210 225
220 230 235 240 245 285 290 320 250 270 280 285
F410-G10EV F410-G12EV F410-G13EV F410-G14EV F410-G15EV F410-G18EV F410-G20EV F410-G25EV F410-G10EVW F410-G12EVW F410-G13EVW F410-G14EVW
for air :
0.25 (36)
G1/4 for paint: G3/8
Gravity
250
Tulip
6CP
10EVW 12EVW 13EVW 14EVW 15EVW
for air :
0.25 (36)
G1/4 for paint: G3/8
Gravity
250
Tulip
6CP
F410-G15EVW 290 • Paint viscosity should be 15 seconds for two-component urethane paint for automotive refinishing using a Meiji model V-1 viscosity cup.
1MPa = 145.04 Psi
JSR Entech Catalogue 880
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook