Spray Gun
Extension Spray Guns ปืนพ่นสีชนิดยาว
F-110 SERIES
Ideal for painting in elevated locations and for painting the inside surface of pipes, tubing, tanks, etc. The head angle can be adjusted 360° by simply loosening the base nut. Besides in head angle variable type, the head angle can be adjusted from 90° to -90° by loosening the top bolt. The dual pipe system employing separate pipes for the air and paint enhances compactness and durability.
As the air circuit for spraying is not same as the one for spraying pattern, you can adjust the spraying pattern at hand. (Head angle variable type) Model F110-PXL is equipped with a special nozzle and cap developed for painting the inside surface of pipes, making it ideal for painting the inside of long pipes with a small inner diameter. Model F110-PX17LA can spray both full cone and hollow cone in adjusting the position of pipe place, and it is suitable for sparying inside of the pipe in less than Ø300mm.
Spraying pressure
Paint spraying volume mL/min
Maximum effective pattern width (mm)
Head angle and inner dia. into which head can be inserted mm
Nozzle bore (mm)
Spraying distance (mm)
Air consumption L/min
Required compressor output kW
Pipe length mm
Order No.
Type Paint feed system
MPa (PSI)
~500
F110-PXC10P- F110-PXC10P - F110-PXC13P- F110-PXC13P- F110-SXC15- F110-GXC15- F110-PX10P- F110-PX10P- F110-PX10P- F110-PX10P- F110-PX13P- F110-PX13P- F110-PX13P- F110-PX13P- F100-SX15- * F110-SX15- F110-GX15- F110-PX11L- F110-PX11L- F110-PX11L- F110-PX11L-
1.0
160
190 210
Head angle variable type extension spray gun
550~1,000*
Pressure
1.5
~500
0.25 (36)
0° : 40 90° : 60
1.3
175
235 220
200
550~1,000*
Suction Gravity
60 65
110 115
~500* ~500* ~500
1.5
125
0.75
550~1,000 1,050~1,500 1,550~1,800* 550~1,000 1,050~1,500 1,550~1,800* ~500
1.0
180
245 230
Pressure
1.5
Extension spray gun
0.25 (36)
0° : 40 45° : 55
200
1.3
195
310 240
~500* ~500* ~500* ~500
Suction
120 150 140 160
1.5
140
0.75
Gravity
0° : 40 (straight only)
550~1,000 1,050~1,500 ,1550~1,800* 550~1,000 1,050~1,500 1,550~1,800* ~500 550~1,000 1,050~1,500 1,550~1,800* ~500
Pressure 1.5 0.25 (36)
200
70
120
60
0.75
F110-PX17LA- (Full cone) F110-PX17LA- (Full cone) F110-PX17LA- (Full cone) F110-PX17LA- (Full cone) F110-PX17LA- (Hollow cone) F110-PX17LA- (Hollow cone) F110-PX17LA- (Hollow cone) F110-PX17LA- (Hollow cone)
Pipe inside spraying extension gun
0° : 13 (straight only)
Pressure
150
130 100
1.3 0.3 (44)
180
1.5
0° : 20 (straight only)
300 (130)
300 (250)
Pressure
30
• Pipe Iength with mark * is the maximum length. Use of the longer pipe will result in reducing paint spraying volume. • Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup, and the feed pressure for PX models should be 0.08MPa • Nozzle bore of 0.8mm and 1.5mm for PX type is available, Nozzle bore of 1.0mm, 1.3mm and 2.0mm for SX and GX types is available. • For Model F110-PX17LA ; Paint viscocity should be 12 seconds, 20 seconds in parenthesis, for lacquer enamel using a Meiji model V-1 viscosity cup, and the feed pressure should be 0.08MPa, 0.03MPa in parenthesis. • Air and paint inlet : G1/4 1MPa = 145.04 Psi
JSR Entech Catalogue 885 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook