Spray Gun
Low Pressure Atomization Automatic Spray Guns ปืนพ่นสีแรงดันตํ่าชนิดออโตเมติก
A-110L SERIES
Remote control compatible Spraying pattern can be adjusted by remote control. Tube fixtures
Use of 3D air Exceptional atomization at a very low air cap internal pressure of 0.07MPa. 3D air, whose air flow direction is diagonal, realizes more stable spraying pattern. Higher transfer efficiency, low spattering, and environment-friendly while lowering costs.
Commercially available fixtures are used for the air and paint connection ports for easier use.
Dimensions (mm)
A110L-P
A110L For the control circuit
Lower air pressure design realizes saving by about 30% in the air consumption and improving by about 10% of transfer efficiency. Furthermore, less spattering paint brings less paint volume and improvement of working environment.
Spraying pressure MPa (PSI)
Air pressure inside cap MPa
Spraying distance mm
Air consumption L/min
Paint spraying volume mL/min
Maximum effective pattern width mm
Nozzle type
Paint feed system
Nozzle bore mm
Order No.
0.6 0.8 1.0 1.3
85 165 225 320
190 230 250 270
A110L-P06LP A110L-P08LP A110L-P10LP A110L-P13LP
0.18 (26)
0.07 (10)
F110L Pressure
200
345
• Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup. • Feed pressure should be 0.08MPa. • Circulation type is available. Pleaase specify the circulation type on your order.
1MPa = 145.04 Psi
Automatic Spray Guns ปืนพ่นสีชนิดออโตเมติก
Lightweight and compact The lightweight, compact design allows installation even in confined spaces. Highly durable non-lubricated type (FA110, FA210, A110, A210) The use of a special "U" needle packing on the paint line improves durability and eliminates any need for lubrication. Durability is further improved by use of a Teflon needle packing on the air line. Adaptable for remote control (A110, A210) (This performance is option in FA type.) The pattern can be adjusted (opened and closed) by remote control using compressed air. Stainless steel passage for waterborne compatibility (FA110, FA210) FA110/FA210/A110/A210 JA/SA/A55/AHS2A SERIES
New atomization system (FA110, FA210, A110, A210, SA110) Realizing high quality paint film by optimum spraying paint volume.
Spraying pressure
Air consumption L/min
Paint spraying volume mL/min
Maximum effective pattern width (mm)
Paint feed system
Nozzle bore mm
Standard air cap
Type
Order No.
Main application
MPa (PSI) 0.25 (36)
0.8 08P 1.0 10P 1.3 13P 1.5 15P 1.2 12P 1.5 15P 2.0 20P 2.5 25P 0.8 08P 1.0 10P 1.3 13P 1.5 15P 0.8 08P 1.0 10P 1.3 13P 1.5 15P 1.3 13P 1.2 12P 1.5 15P 2.0 20P 2.5 25P 0.8 08P 1.0 10P 1.3 13P 1.5 15P 0.8 08P 1.0 10P 1.3 13P 1.5 15P
220 230 280 290 335 345 375 410 220 230 280 290 220 230 280 290 280 335 345 375 410 220 230 280 290 220 230 280 290
180 245 310 330 530 880 180 245 310 330 180 245 310 330 310 530 880 180 245 310 330 180 245 310 330 100 240 100 240
230 240 270 275 350 370 230 240 270 275 230 240 270 275 270 350 370 230 240 270 275 230 240 270 275
FA110-P08P FA110-P10P FA110-P13P FA110-P15P FA210-P12P FA210-P15P FA210-P20P FA210-P25P A110-P08P A110-P10P A110-P13P A110-P15P
Small object, low viscosity, top coating Small object, low and middle viscosity top coating Large object, low viscosity, top coating Large object, middle viscosity, surface and top coating Large object, high viscosity Small object, low viscosity, top coating
F110
200
0.25 (36)
F210
250
1,280 400 1,710 420
Small object, medium viscosity, surface and top coating
A110-P08P-C (Circulation Type) A110-P10P-C (Circulation Type) A110-P13P-C (Circulation Type) A110-P15P-C (Circulation Type) A100-P13-C* (Circulation Type) A210-P12P A210-P15P A210-P20P
Small object, low viscosity, top coating
0.25 (36)
F110
200
Small object, medium viscosity, surface and top coating
Large object, low viscosity, top coating Large object, medium viscosity, surface and top coating Large object, high viscosity
0.25 (36)
F210
250
1,280 400 1,710 420
A210-P25P JA110-P08P JA110-P10P JA110-P13P JA110-P15P SA110-P08P SA110-P10P SA110-P13P SA110-P15P A55-P05R A55-P08R A55-P05 A55-P08 AHS2A-P30 AHS2A-P40
Small object, low viscosity
0.25 (36)
F110
200
Small object, middle viscosity
Low viscosity
0.25 (36)
F110
200
Middle viscosity
~25 Round
0.5 0.8 0.5 0.8 3.0 4.0
30 66
~35 ~90 ~120
F55
— 0.2 (29)
Small object, low viscosity
160
HS2
— 0.29 (42)
—
— 260
Large object, high viscosity
180 • For 110 and 210; Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup. • For AHS2A; Paint viscosity should be 22 seconds for lacquer enamel using a Meiji model V-1 viscosity cup. • Feed pressure should be 0.08MPa for 110 and 210 types, 0.1MPa for AHS type. • Circulation type is available in FA110, FA210, A110, A210 and AHS2A
1MPa = 145.04 Psi
JSR Entech Catalogue 888
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook