Spray Gun
Extension Automatic Spray Guns ปืนพ่นสีขนาดยาวชนิดออโตเมติก
FA110/A110 SERIES
(Head angle variable type only)
The head angle can be adjusted 360° by simply loosening the base nut. Besides in head angle variable type, the head angle can be adjusted from 90° to -90° by loosening the top bolt. In A110 type, by making another pattern air circuit, you can adjust the spraying pattern by remote control. (This performance is option in FA type.)
Head angle and inner dia. into which head can be Inserted (mm)
Maximum effective pattern width (mm)
Paint spraying volume mL/min
Spraying pressure MPa (PSI)
Pipe length (mm)
Nozzle bore mm
Order No.
Type
1.0 0.25 (36) 1.3 1.0 0.25 (36) 1.3 1.3 0.3 (44) 1.3 1.0 0.25 (36) 1.3 1.0 0.25 (36) 1.3
210 220 230 240
FA110-PXC10P FA110-PXC13P FA110-PX10P FA110-PX13P FA110-PX11L A110-PXC10P A110-PXC13P A110-PX10P A110-PX13P
0˚ : 40 90˚ : 60 0˚ : 40 45˚ : 55
Head angle variable type extension automatic spray gun Extension automatic spray gun
200 160 190 175 235 200 180 245 195 310
1.5 1.5
500 500
0˚ : 13 (Straight only) 0˚ : 20 (Straight only)
1.5 0.25 (36) 200 70
120
60
0.75
Pipe inside extension automatic spraying gun
500
150 180 130
100 210 220 230 240
FA110-PX17LA (Full cone) FA110-PX17LA (Hollow cone)
1.5 1.5 1.5
30
300 (130) 300 (250)
0˚ : 40 90˚ : 60 0˚ : 40 45˚ : 55
Head angle variable type extension automatic spray gun
200 160 190 175 235 200 180 245 195 310
500 500
Extension Automatic spray gun
~500
A110-PX11L- A110-PX11L- A110-PX11L- A110-PX11L- A110-PX17LA (Full cone)
550~1,000 1050~1500 1550~1800*
0˚ : 13 (Straight only) 0˚ : 20 (Straight only)
1.5 0.25 (36) 200 70
120
60
0.75
Pipe inside extension automatic spraying gun
150 180 130
100
1.3 0.3 (44)
1.5
500
A110-PX17LA 300 (130) 300 (250) • Pipe Iength with mark * is the maximum length. and it is possible to make the pipe length in 50mm measure within maximum length. • Use of the longer pipe will result in reducing paint spraying volume. • Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup, Feed pressure should be 0.08MPa. • For Model F110-PX17LA ; Paint viscocity should be 12 seconds, 20 seconds in parenthesis, and the feed pressure should be 0.08MPa, 0.03MPa in parenthesis. (Hollow cone) 30
1MPa = 145.04 Psi
• Nozzle bore of 0.8mm and 1.5mm for PX type is available, • Specification is for spray guns of pipe of pipe length 500mm.
Sepration Type Automatic Spray Guns ปืนพ่นสีออโตเมติก
AD/FAD SERIES
Short-distance painting With taper structure of the nozzle tip, AD-P and FAD are applicable to short-distance painting, which enable high atomization and low spattering performance with a small paint spraying volume and small air consumption, and provide high-quality coating film. Remote operation Atomization air and pattern air are supplied via separate circuits. This structure enables remote operation of individual circuits. Maintenance efficiency improvement The spray gun is divided into three sections : cap base, gun body and cylinder body. This structure simplifies parts replacement, and enables the body (paint circuit) to be washed after immersed in solvent, resulting in mainte- nance efficiency improvement. Disassembling work is easy, without necessity of a special tool.
Body (Fluid circuit)
Cap base
AD-P
AD-P
Bolt for attachment Cylinder body
Change to SUS circuit for liquid contact area A SUS circuit can be used for the liquid contact area by changing the body. Compatibility Since the cap base and the body are applicable to both AD-P and FAD, AD can be changed to FAD by replacing a set of the cylinder body.
Built-in atomization air valve with remarkably Lighter weight and smaller body (FAD-P) The operation circuit has been simplified, resulting in Higher operability. FAD-P provides 40% lighter weight and 24% smaller size than our conventional model (FA), and provides an enlarged teaching range. Compatibility with circulation type When the plug and plug packing are removed from the aperture of the circulation circuit, these models can serve as the circulation type.
Pattern air pressure
Nozzle bore mm
Atomizing air pressure MPa
Spraying distance mm
Fluid feed pressure MPa
Air consumption L/min
Paint spraying volume mL/min
Maximum effective pattern width mm
Nozzle type
Order No.
MPa (PSI) 0.25 (36)
AD-P10ST AD-P10ST-SU AD-P13ST AD-P13ST-SU FAD-P10ST FAD-P10ST-SU FAD-P13ST
1.0 1.3 1.0 1.3
0.03 0.04 0.03 0.04
110 215 110 215
100 180 100 180
145 180 145 180
F110
0.25
200
0.25 (36)
F110
0.25
200
FAD-P13ST-SU • Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup. • FAD type is built-in air valve for atomizing air. • Dimensions are shown at page before this page
1MPa = 145.04 Psi
JSR Entech Catalogue 889 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook