Spray Gun
Joint Box Type Automatic Spray Guns ปืนพ่นสีออโตเมติก
AJ SERIES
Adoption of new type of nozzle and cap With taper structure of the nozzle tip, AJ-P enables high atomization and low spattering, with a small spraying volume, resulting in maintenance and improvement of economical effect, environmental conservation and continuous painting performance.
Detachable bolt Joint box Gun body Cap base
AJ-P
AJ-PF
Maintenance efficiency improvement and attaching/detaching time reduction
High transfer efficiency for flat surface finish (AJ-P08F) Reduce overspray and paint adhesion on air cap by obtuse angle low air horn. Low spraying pressure and gentle air flow create flat and less irregular surface.
The gun body and the joint box can be attached and detached with a single bolt, and the joint and hose need not be removed from the gun body, thus enabling easy positioning when the joint box is remounted after maintenance. No special tool is required for all maintenance step work.
Atomizing air pressure MPa (PSI)
Pattern air pressure MPa (PSI)
Spraying distance mm
Fluid feed pressure MPa
Air consumption L/min
Paint spraying volume mL/min
Maximum effective pattern width mm
Nozzle type
Nozzle bore mm
Order No.
0.8 0.8 1.0 1.3 1.5
0.15 (22)
0.15 (22)
150
0.04
230 220 230 280 290
100 180 245 310 330
90
AJ-P08F AJ-P08P AJ-P10P AJ-P13P AJ-P15P
230 240 270 275
F110
0.25 (36)
0.25 (36)
200
0.08
1MPa = 145.04 Psi
• Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup • Dimensions are shown at page before this page • Circulation type is available. Pleaase specify the circulation type on your order.
JSR Entech Catalogue 891 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook