Spray Gun
Diaphragm Paint Pumps เครื่องปั๊มสี
PDP-05B, PDP-05-SU, PDP-10A
Downsizing fluid circuit leads to reduction of fluid residual inside of the pump. (Fluid residual of PDP-05 types : 6mL). This contributes to reduction of VOC (Volatile Organic Compound) emissions by saveing cleaning liquid. Connecting metal air circuit has been modified to enhance pump performance. Prevention against malfunction caused by loosened parts of diphragm. Paint pressure reduction valve has been modified to separate type for easy maintenance. Diaphragm pump and paint pressure reduction valve, FR-1A are available separately as an individual part. Fluid circuit of PDP-10A has been widen to improve pump performance. Prevention against pump malfunction caused by over discharge has been improved
Waterborne
for PDP-10A. Applications • Painting with frequent color changes • Built-in painting systems • Substitute for suspended gravity-feed tank • Single-gun, small-volume painting
PDP-05-SU
PDP-058
Order No.
PDP-05B PDP-05A-SU PDP-10A DP-05B DP-05-SU DP-10A
Diaphragm pump model
Paint pressure-reduction valve model
FR-1A
— FR-1A
Max. air pressure
MPa 0.69
0.7
0.69
Max. discharge rate (value measured in water)
Pump
4
—
7.5
L/min
Diaphragm cycles
Cycles/min (PSI) MPa
0~400
0~375
PDP-17B
Pressurere duction valve
Paint pressure adjustment range
0~0.35 (0~51)
Max.flow rate
L/min
1.5
1.0
1.5
Paint outlet bore Air inlet bore
G1/4 x 1 G1/4 x 1
Approx. dimensions (W x D x H)
mm200x296x421212x245x426200x311x446
Waterborne
PDP-10A
Note : PDP-05-SU is a built-in pressure-reduction valve and can not be
used as transfer pumps If a transfer pump is required, select the DP-17B.
1MPa = 145.04 Psi
PDP-17B series Paint is drawn in, pressure-feed and supplied while adjusting to the appropriate pressure. Simple design for easy color changing and maintenance, as well as easy setup and location changes. Teflon coating (PDP-17B-TF). Stand type with a built-in mixer (PDP-17B-SP). Stainless steel passage for waterborne compatibility (PDP-17B-SU). Applications • Painting robots • Automatic painting systems • Paint supply to high-volume spray guns
PDP-17B-SU
Order No.
PDP-17B PDP-17B-TF PDP-17B-SP PDP-17B-SU DP-17B DP-17B-TF DP-17B DP-17-SU FR-4A FR-4A-TF FR-4A FR-4A-SU
PDP-17B-SP
Diaphragm pump model
Paint pressure-reduction valve model
Max. air pressure
MPa
0.69
Max. discharge rate (value measured in water)
Pump
L/min
17
Diaphragm cycles
Cycles/min (PSI) MPa
0~170
Teflon coa ting
Pressure reduction valve
Paint pressure adjustment range
0~0.35 (0~51)
Max. flow rate
L/mln
2.0
Paint pressure regulator valve cover, Body Pump cover (both sides) Pump adapter
Paint outlet bore
G1/4x1 G1/4x1
Air inlet bore
Approx. dimensions (W x D x H)
mm 425x340x570 425x340x570 438x388x810 425x340x540
• SU model is stainless steel. • Models equipped with two pressure-reduction valves (two G1/4 bore paint outlets) are also available by special order.
1MPa = 145.04 Psi
PDP-17B-TF pump
Paint Pressure -Reduction Valve อุปกรณ์สำ �หรับเครื่องปั๊มสี
Order No.
FR-1A FR-4A FR-4A-TF FR-4A-SU
Paint pressure adjustment range
MPa
0~0.35
Max. flow rate
L/min
1.5
2
Valve effective sectional area
mm 2
16
Paint outlet Paint inlet
B
G1/4
FR-4A
B
G1/4
G3/8
• SU model is stainless steel.
1MPa = 145.04 Psi
JSR Entech Catalogue 893 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook