Grease Guns & Tyre Inflaters
Button Head Fitting Coupler
หัวอัดจารบีหัวงอ 90 O (สำำ �หรับกระบอกอัดจารบีมืื อบีบ-มืื อโยก) 90° Special Angle Coupler
หัวอัดจารบีแบบเม็็ ดกระดุ (สำำ �หรับกระบอกอัดจารบีใช้้
)
05-049
05-048
05-058
Designed for hard to reach grease fittings, this 90° coupler with hex head greases fittings in confined spaces. ⅛ ”- 27 NPTF. Recommended working pressure is 1,000 psi.
Specially designed for button head grease fittings. ⅛ ” NPT female inlet. Zinc-plated steel.
Order No. 05-048 For 5/8” button head fittings. 05-049 For 7/8” button head fittings
Order No. 05-058
หัวอัดจารบีหัวหมุุ นได้ 180 ° (สำำ �หรับกระบอกอัดจารบีมืื อบีบ-มืื อโยก) 180° Swivel Coupler
หัวอัดจารบี (สำำ �หรับกระบอกอัดจารบีใช้้ Heavy Duty Coupler
)
Couplers for air operated equipment
05-036
05-050
Designed for use with air powered equipment as well as hand guns. Heavy duty construction withstands higher pressures. 3 hardened jaws reverse for longer coupler life. 2” long coupler with 11/16 ” diameter is tapped for ⅛ ” pipe threads. Recommended working pressure is 8,000 PSI.
Designed to lock at any angle up to 180°. Spring-loaded sleeve locks coupler in place for straight applications or slides back for angular application. Has 8” overall length and corrosion-resistant finish. for hand operated grease guns only. Recommended working pressure is 3,000 PSI.
Order No. 05-050
Order No. 05-036
หัวอัดจารบีหัวหมุุ นได้ 360 ° (สำำ �หรับกระบอกอัดจารบีมืื อบีบ-มืื อโยก) 360° Swivel Coupler
หัวอัดจารบีหัวหมุุ นได้ 360 ° (สำำ �หรับกระบอกอัดจารบีใช้้ 360° Heavy Duty Swivel Coupler
)
Couplers for air operated equipment
05-052
05-057
Swivels in a full 360° circle and locks in place. 45° angle gives easy access to most grease fittings. Comes with 05-028 standard grease coupler and ⅛ ” female inlet for extension pipe. For hand operated grease guns only. Recommended working pressure is 4,500 PSI.
Swivels in full 360° circle and locks in place. 45° angle gives easy access to most grease fittings. ⅛ ” NPT female inlet. For use with air operated equipment. Recommended working pressure is 6,000 PSI.
Order No. 05-057
Order No. 05-052
JSR Entech Catalogue 901 jetco@jet.co.th
jet@jet.co.th
Powered by FlippingBook