Measuring Tools
Dial Accessories อะไหล่ไดอัลเกจ
Spherical Point (Carbide) • A large radius makes this contact point optimal for use where the workpiece needs to slide from the side.
Conical Point (Carbide) • Used for positioning the measurement point. Since it can damage a workpiece easily, it is not suitable for use on soft materials.
Flat Point (Carbide) • Optimal for use on convex surfaces.
Unit : mm
120059
120057
120056
A: M2.5x0.45 Order No.
D L
SR
A: M2.5x0.45 Order No. 120057
A: M2.5x0.45 Order No. 120056
5.2 7.5
5
5 7
120058 120059 120060
10
10.5 10
10
Conical Point • Used for positioning the measurement point. Since it can damage a workpiece easily, it is not suitable for use on soft materials.
Unit : mm
Unit : mm
120043
120068
A: M2.5x0.45 Order No.
D d 5.2 4.3* 10.5 9.5* 17 15** 22 20** 27 25** 7 6.5* 32 30**
L 5
120041 120042 120043
10 10 10 10 10 10
21AAA345 21AAA346 21AAA347 21AAA348
A: M2.5x0.45 Order No. 120068
Unit : mm
101120
Fiatness*3µm **5µm
Flat Point • Optimal for use on convex surfaces.
A: M2.5x0.45 Order No.
Unit : mm
Tip angle
L
60°
10
101120
137255
Unit : mm
101385
A: M2.5x0.45 Order No.
131365
D d
L
A: M2.5x0.45 Order No.
A: M2.5x0.45 Order No.
7 9
6.4
10 10
137255 137399
L 8
Tip angle
L 5
8
131365
90°
101385
Lever Point • Suitable for use on perpendicular faces, such as those within mold cavities. Lever can be adjusted to the required angle.
10
21AAA340
Knife Edge Point (Carbide) • Suitable for measuring narrow groove diameter, etc.
Unit : mm
Unit : mm
101117
Unit : mm
A: M2.5x0.45 Order No.
120067
900391
D
10 15 20 25 30
101117
21AAA341 21AAA342 21AAA343 21AAA344
A: M2.5x0.45 Order No. 900391
A: M2.5x0.45 Order No. 120067
JSR Entech Catalogue 94
jet@jet.co.th
jetco@jet.co.th
Powered by FlippingBook